Amazing Self Leveling Concrete Floor Being Done!

#EverythingAboutConcrete #MikeDayConcrete #selflevelingconcrete
Check out how we do a self leveling concrete overlay over this old, rough, pitted concrete floor.
This is how we make an old concrete floor look like new again.
Use this self leveling overlay as the finished floor or as an underlayment for another type of flooring.

LEARN FROM ME - PRIVATE MEMBERSHIP AREA:

GARAGE FLOOR EPOXY FLAKE COATING COURSE:

MY STAMPED CONCRETE COURSE:

MY CONCRETE SLAB COURSE:

FOUNDATION CRACK REPAIR COURSE:

GARAGE EPOXY FLOOR COATING COURSE:

VISIT MY WEBSITE:

USE THE SAME TOOLS I DO:

36" MBW POWER TROWEL:

ScreeDemon Gas Powered Vibratory Screed:

Screedemon Battery Powered Vibratory Screed:

14' Screed Board for ScreeDemon:

MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:

TOPCON LASER LEVEL:

DEWALT PENCIL VIBRATOR TOOL:

INVERTER GENERATOR LIKE WE USE:

BULLFLOAT:

HAND FINISHING KNEE BOARDS:

MAG FLOAT & STEEL TROWEL SET:

2" MARGIN TROWEL:

CONCRETE PLACER OR KUMALONG:

CONCRETE FINISHING BROOM:

CONCRETE SCREED:

CONCRETE EDGER:

CONCRETE GROOVER:

BOSCH HAMMER DRILL:

MY RECOMMENDED TOOLS PAGE:

SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:

Follow me on Twitter:

Follow me on Instagram:

Follow my Facebook Page:

[diegosantiago]

We do 3 bags at the time in each mixing barrels drums (3 barrels at the time) we use a squeegee to spread the mud if needed

[adriandiaz]

Who's all going to world of concrete next week in Vegas 🙋‍♂️ Thanks for all the videos they've helped me out a lot in my job!

[karma]

Do we need to do some prepping? Like fill in cracks and so forth

[janinemartinez]

Will this handle minor concrete cracks or leaks in the basement ????

[roy]

I saw a guy that hard a 55 gallon drum mounted to a roll around. The drum had a 2" valve on the bottom. He would mix his self leveler in the drum, open the valve, and wheel the drum around. I thought that was a good idea!

[DESurrey]

That looks like what I need to resurface my garage floor. Can you please provide the specific type of Sakrete you used, and any other materials, such as a pre-coat before the Sakrete. I’m a complete novice, so I need as much hand-holding as possible. Thanks.

[saidtheblueknight]

What is the brand of the overlay you used? Or is that not something you can divulge?

[OneTuffCowboy]

Looking to do this in my own house and I’m just curious if you could tell me how much this particular project cost? My floor is about the same size and I think the price would be relatively similar. Thanks

[doctorballer]

Any suggestions? We had an overlay done inside home. Contractor did a stamp which is way to aggressive. Looks cool but very rough. We also have some areas that are cracking.
If we wanted to do regular floors what would you suggest? A self leveling over this self leveling and then tile or chip the entire house out? Roughly 2000 feet of stamped flooring. Including kitchen and 2 bathrooms

[RB-esvx]

For bigger cracks, 2 inches deep.
I should fill in the cracks first and then the self leveler?

[yoofaceee]

We used some of that stuff before but we had to sand floor with a machine and add some kind of primer because the first time we dint use it that stuff was cracking off

[beachboardfan]

Does this stuff bond at all to the concrete below it or is it super prone to cracking if something is dropped on it?

[maryellis]

Can this self levelling floor be made to any thickness ?

[Blessd-savingrace]

4 real your channel is informative
THANK YOU

[rubenmorales]

I did a stamp and I use a powder release with a water proof sealer now I have a low spot to fix is for a driveway can I use this product there in afraid to cracks with the vehicles

[trulyhappy]

And it won’t crack or separate from the concrete??

[JoeMalovich]

would a dappling bar help it flatten out better?

[stephmo]

I don't know anything about concrete so i wanted ask, when prepping a floor for this self leveling is there any sort of chemical adhesive/bond that needs to be applied before the self level concrete is poured? Or would it just be a general grinding, sanding, cleaning of the top layer of the original floor?

[TheLinkminer]

Mike, is it possible to use self leveling mix to repair an area that has a 6” swell?
I recently mud jacked my shop but ended up with a pretty big dip in the floor. The area for leveling is approximately 20’x30’. This all tappers down to the 6” in the center. Or would you suggest some other method.
Thanks, Gary

[sergiocasillasgomez]

So all this stuff is is just watered down concrete mix with some extra hardener or less 🤔 just wondering I'm not a construction guy but wanna level my living room