Supercharged 1UZ-FE (Toyota Soarer) Walk Around

Показать описание

Early 1UZ-FE Motor
Harrop TVS2300 Supercharger
Bosch EV14 550cc Injectors
Walbro 400 Fuel Pump
Turbosmart FPR1200 Fuel Pressure Regulator
Denso R8 Coil on Plugs
NGK Iridium Spark Plugs
Link G4+ Extreme ECU
GM Solenoid IACV
Bullet Intake Manifold
Custom Intake Piping

1 3/4" Rush Stainless Long Tube 4-2-1 Headers
High flow 3" Cats (200 cell)
3" Magnaflow Mufflers
2.25" Mild Steel + H Pipe
4" Chromed Tips

T56 Magnum 6 Speed
OS Giken 1.5 way LSD
Custom 1 Piece Steel Driveshaft

LS400 Big Brake Setup
Rays CE28RT Black Edition
18x9.5 18x10.5 +22
HSD Monopro 15k/12k Coilovers
Bell Raceworks RLCA
Bell Raceworks FLCA
Solid differential bushes
Strongflex sport full bushing kit

Рекомендации по теме

Комментарии

I love how the rest of the world has been knee deep in 1uz's for a decades. This is probably the cleanest, most complete supercharger set up I've seen on 400/soarer. Here in the states I think we are catching up due to the popularity of 1uz's in the drift scene, but I find myself shopping in Australia, New Zealand and the UK for specialized 1uz parts that we don't have or just are not very popular state side.

mightyeye

Hi Andy I am from Sydney as well, I just bought a SC400. I am new to this world but, I have plans to get supercharger on my one, this looks awesome bro!

felipeedmar

Very clean work my man looks like it was made that way.

Minifridge

Even with a Supercharger, the valve-tick was inevitable...

My 1UZ has it too XD

Birch_ON

Vvti? Did you do thicker rods and lower compression pistons?

TheMcstevester

Seems non-vvti 91-94 motor...is the way to go.

gRosh

Would you consider fitting a BPP fuel rail and bigger injectors to run E85? The cooling effect of the E85 would allow you to run more timing :-)

jrbuch

Did you move the power steering pump or is it in the same place? Sorry if it's a dumb question it's just that I noticed that the reservoir is in a different area than the one on mine (LS400)

Dunki

As we both know, original gauge clusters and needles tend to fail, what electric set up are you running on your sc?

lucasbarber

Really nice, I have a gs400 from Canada here. Can you please give me some info about the set up

randeepghataura

Hey Andy great work! Love your vids. I'm in WA. I have a uzz32 with plans for an m90 neatly under the stock hood I'm at the beginning of my Supercharging journey I would love some info or even if you could point me to a good resource, There are 3x used superchargers for sale at the moment was considering piecing together a kit piece by piece but that sure seems much harder than just buying a kit, I was hoping to buy used and recondition. Any advice :)

ClearBlueFire

Beautiful work, my respect.
What coils are you using from Audi R8 with the harness plugs?

marineyacht

Nice, I’m looking to have a similar setup on an A70 Supra. I got a HTV2300 real cheap, but I thought it was too large. What size pulley and how much boost are you running? I was aiming for 20psi, but then I think I’ll run into pressure ratio issues

lesterspasinski

Hi Andy, what ecu and injector combination are you running? And what year engine do you have? I’m building an old FC Holden and am looking for a donor car for the conversion, but have just bought a 122 with built in intercooler from a Cadillac STS-v. I’m looking for similar power figures to yours👍 Are you in Australia? Some tips would be awesome! Thanks🍻

mattpenhall