How to Reference Frequency Ranges with FabFilter Pro-Q 2

A video on using the FabFilter Pro-Q 2 to reference specific frequency ranges in a mix compared to a reference track.

–

Transcript:

Today I'm going to talk about referencing. This is a modern rock track, so I pulled in some different genre rock songs, but I've got tracks from Strung Out, Taking Back Sunday, All Time Low, Protest the Hero, all kinds of stuff in this session. Yellowcard, one of my favorite bands back in the day.

I love these tracks, I love the sonics, I'm listening and I'm studying, I'm getting in the headspace to mix a modern rock song, so I pulled these in and then I'm listening for how are they mixing the low end, the bass? I'm trying to reverse engineering – reverse engineer what's going on to prepare myself for mixing this track, and not only that along the way, I use a technique where I pull in an EQ and I reference in the box, I'm going to show you that right now.

If I come down here to my master fader, I've got an instance of the FabFilter Pro-Q 2. This could be your stock EQ, it doesn't matter what one you use, and pull that guy up, and I've got a high-cut, low-pass filter set to 30Hz. This would be similar to the equivalent of turning off your mains and just listening to the sub.

I definitely recommend using a good pair of headphones, cans, or if you have a system, make sure you have a sub or a way to hear super sub frequencies here.

What I'm going to do is I'm going to find a high point in my song, and I'm going to throw a marker there or check my markers, and then I'm going to go to some of these other tracks, and I'm going to listen to my low end up against their low end.

You'll see some of these tracks have been dropped a couple of dB. That's because I disagree with how loud they were mastered. Minus five at some of these, LUFS, and so I'm pulling those back a couple of dB because I want a little bit more conservative – still pretty hot, but I went to around minus seven, minus six, something, I don't know what the peak is.

So anyways, I'm going to hit play on mine, put myself on the spot here, this is close to my finished mix. I'm going to listen to my subs, see how much it's shaking down in the 30-40Hz range, and then I'm going to go back and forth between some of these other tracks and see how I'm panning out.

[music, just subs]

I think this is a CLA mix. The All Time Low Runaways.

Some more of these tracks... That one has got barely anything down there. Some big subs on that one, right? So cool, so we can click through and we can hear our subs up against theirs, and then what I'll do is I'll just kind of slide this up, and I'll just be listening. Is the kick pulsing that I'm hearing more from them versus me? Does it sustain the low end? If I hear a couple of those tracks have a little bit more sustained low end, so I may go listen to those and see, maybe they have sub sine wave bass going on.

I don't have that in this particular track, nor am I going to take the time to do it for this particular song, but I may hear and be able to reverse engineer what's going on in theirs versus mine, and then make a decision, do I want to add more subs to the kick? Do I want to add more fullness to the bass? Do I maybe need to compress against the bass a little bit more? Are their notes sustaining and holding out more than mine?So the technique is a great one to go through and what I'll do is I'll just kind of open that up and I'll work my way up. I'll listen to 50Hz and below on mine and below. 70, 80, 100Hz and below, and then once I get to 100Hz, I kind of slide this up and start focusing on the low-mids, and that's when I'll instantiate a high-pass filter, the low-cut, and I'll put that at about 100. So now, I'm not focusing on the subs anymore, I just want to hear what's going on in this low-mids.

This is really OCD. I think you can learn a lot from doing this if you've never done it before. Definitely give this a shot. Listen to some of your favorite tracks. I'll even pull in mixes that are in other genres, because of the loudness and the way that we're pushing things for iTunes Radio and whatnot.

You can get a good look at your genre versus other genres by referencing and pulling other things in. Magic A/B is I look up here and see it is a great plug-in for that. You can pull in – I'll give a little shoutout for these guys – you pull in multiple mixes, and you can go through and click, and then do A/B between your mix and theirs.

This is another great tool. I like to have the mixes in for EQ match and other reasons, but Magic A/B is a great one too.

[truncated]

[Hteyasizyc]

Dude after ZILLIONS of hours, i tried this and realized my metal mix was lacking from 80 to 160 (compared to 2 references i wanted it to sound like) and when i brought those up (on bass) then turned the bass guitar down in volume it filled in the WHOLE low end ! Fucking excited. Thank you for this ! This is an amazing tip.

[vedasticks]

Definatly make sure you have a sub, or a decent pair of headphones.

listened on my studio spares SN-10's even with a low shelf boost on them pretty much silence at comfortable listening level.

Wow, that bass sounds gnarly! love it.

[noreaction]

Struck out, tbs, yellow card, new found glory, protest the hero, all time low, all great reference tracks

[ChrisJNairn]

Thanks David! I used to be a HUGE yellowcard fan, Ocean Ave is a work of art!

[the.brad.thomas]

I'm sad I haven't been able to purchase Mixing Modern Rock yet :( soon, though!

[wokamo]

Hi, just wondering, is Loender basically doing the same thing as LoAir? Nice tutorial, cheers! :)

[JamesRJKR]

Hey David, after watching a bunch of your videos, you seem to have a lot of domains. Why don't you just consolidate all of your stuff into one website?