SiM800L Relay Control With Arduino IR Remote and Push Buttons | GSM Based Home Automation

#Arduino #Sim800L #HomeAutomation

In this video, I will make a home automation project, using Arduino and sim800l GSM module. By using this project, you can control home appliances manually, with push buttons. Alternatively, you can use IR remote, to control the relays connected to Arduino. you may use any TV remote you have. you can also control the lights by making call to GSM module. The GSM module automatically accept the call after 2 rings. Then you can control the relays by pressing 1, 2, 3 or 4 from the keypad. similarly, you can turn OFF the relays, by pressing the same keys. this method is call DTMF.

I have also added the SMS feature, to control the relays. send 1, 2 3 or 4 from your mobile phone to turn ON and OFF the relays. By using SMS and DTMF feature, you can control the home appliances from anywhere in the world. This whole project works on GSM network and does not required any internet connection. You can also check the status of any relay (ON or OFF) by sending sms, and you will get the status of the relay on your mobile phone.

Parts:

--------------------------------------------------------------------------------------------------------------------
Useful Video Links
--------------------------------------------------------------------------------------------------------------------
SIM800L AT Commands

Arduino IR Remote Control

--------------------------------------------------------------------------------------------------------------------
Social Media Links
--------------------------------------------------------------------------------------------------------------------
GitHub:
Youtube:

--------------------------------------------------------------------------------------------------------------------
Download Code
--------------------------------------------------------------------------------------------------------------------

--------------------------------------------------------------------------------------------------------------------
Disclaimer
--------------------------------------------------------------------------------------------------------------------
Disclaimer: All videos are for educational purposes and use them wisely. Any video may have a slight mistake, please take decisions based on your research. This video is not forcing anything on you.

Warning: I will use High Voltages which if incorrectly or improperly used could result in serious injuries or death. So be careful of what you are doing because I will take no responsibility for any of your actions.

Warning: In some countries it is required to register gsm module from govt authorities before using it. So, get proper understanding of govt laws related to gsm technologies.

[AAdnaanmtl]

Long awaited superb projectsl. Thanks sir you always make best projects. I really appreciate your hard work and dedication.

[ezeoluchukwu]

This is great work. Excellent. Hope the resistors are connected in pull-ups format.

[farhadrahman]

Boss, It's really awesome. Thank you so much for interesting projects. Keep it up. Love from Bangladesh.

[mrtrippsuk]

great video really excited to try it, would this work with sim900 shield as that's all I have? and if so would the wiring be the same? thanks in advance I love your work

[samgongelectronics]

Great project sir.
Thumbs up.
I had the same problem with the unstable state on the relay in one of my projects.
How is the 1k connected.?
From ground to switch pin?
From +5v to switch pin?
Or across the switch terminals?

[biminyuyt-ndcy]

Thanks sir your project is really amazing keep the spirit up

[BABATECHNICALKNOWLEDGE]

Ni e project Sir sir aap jo arduino or gsm ki wiring thumbnil banate ho which using aap for you making thumbnail

[aydeesam]

Good to see someone from Pakistan doing such work. Subscribed and hope to see more such projects. How about wireless automatic motor pump controller using rf modules for overhead tank?

[AmirHosseinTavoosi-pg]

Hello and thank you for this complete tutorial. I decided to put the project program on the atmega32 microcontroller using the bootloader and I did. The relays work via push button, ir remote and phone call, but the controller doesn't read the sms, can you help me?

[saeidpourafshar]

Excellent, use (433 rf) instead of (ir), I put all text messages in the code with 0 ، With 7 relays.

[SaDEEC]

I am very interested and God bless you..!

[WaqarAhmed-bscw]

Assalamualaikum masha allah nice project

[Vermaelectronics]

Sir program ko thoda chenge kare only oprate only call sms and 1 pin add securty motion sensor

[AhmadMehraGohar]

Assalamualaikum.
Sir g.
As code ma.connect add number k alawa
hum
agr Kisi or connect se call krte hy.
Tu
Kia woh other number wali call bhi yah code attend kre kr relay on ho gi.
Phr tu koi bhi as ko control kr pay ga...

[QasHemeda]

Est-ce que je peut réaliser ce même projet sur gsm 900A

[AAdnaanmtl]

Sir if you can add eeprom and LCD for relay status in future it will be highly appreciated. Thanks for such a nice project

[ahmedtaher]

Excellent project
Can I add a motion sensor when I feel, send me a message and call?

[eyalvathukaravel]

How many days you took to complete this program?

[rampage_xdit]

Thank you very much inadvance for your hard work for upgrade knowledge us and may you add some item like sms response automaticaly for relay status or set admin password or android app with app inventor will be so good.
With best regards

[electricalworld]

A great program, but the dtmf does not like it with me from the first press, it needs more than one pressure in order to respond, whether in stopping or running, so what is the solution to this problem