How to program Orbit 2 Dial 1 Outlet Simple Dial Timer

This video shows how to program the Orbit 2 Dial 1 Outlet Simple Dial Timer. This hose faucet timer offers easy solutions to take control of your hose faucet.
==========
VISIT US AT:

FOLLOW US ON:

[mandys]

Thank you! Exactly what I needed. I needed to change from it's current program and have misplaced the manual since I bought the timer. Much appreciated. :)

[ArthurCampbellReedJr]

Thank you so very much! Your thoughtful and well presented description of this function has put my mind to rest as we depart our home for a few weeks, now more confident than ever that our plants may make it til we return! Much appreciated!

[RichardJohnson-kpkp]

My 62015 has no time screen. At the top is an AM/PM slider & numbers 1 to 12 slider . The dials are the same as this video.
Please explain how to adjust/operate the sliders . Thanks

[andrewwilson]

Every time I check my timer it has reset itself to come on at 12:00, so it doesn’t seem to keep either the current time or the start time. I used a similar one for 9 years with no such problem.

[janicecastelbaum]

How do I set an END time for the day of watering? I'm watering a newly seeded lawn every 2 hours beginning at 7:am and want the watering to end at 7:00 pm. How do is set the END time? Thank you!

[Guun]

Is ‘once’ one time only? And not every day? I realized I had my timer set to once and am wondering if it only watered one time.

[kjeldchristensen]

If the timer is set for 2pm 15 minutes every third day, will the timer start the next time 2pm comes around? If, on day 2, I move either dial, will the timer reset the start day or retain the original third day schedule?

[edungar]

My unit waters continuously, even when I cycle the manual ON and OFF settings on the right dial. Tried pulling the batteries and letting the unit reset, then hooked it up again and water started flowing immediately after I turned on the hose. Any suggestions? Thanks.

[DJS]

Okay, I think I have it programmed iaw this video, the set time is flashing. if I press it too long it the clock starts to move forward as if I am resetting the time. Any advice?

[andrenabrydon]

Is this a low pressure system for gravity fed

[kozmoba]

I have my Orbit programmed. It has been raining and I want to skip a week or so of watering cycles. I thought there was a way to skip a number of days, but can't find it now. Does this unit have this capability?

[davidcarpenter]

the timer is working correctly but the display is intermittently going off and on? the manual does not address this. assume it is weak battery but don't want to replace is this is not the problem

[brentmcdermott]

I set this timer exactly as you described and when I check it the time of day is changed and the time of watering has changed to 12 AM every time what am I doing wrong

[wayne]

I set it to start at noon and water every two hours. However, I have to leave the house by 7:00 a.m. and turn the faucet on when I leave. The water comes on at 8:00 a.m. and 10:00 a.m. and then noon and then every two hours as programmed. Is there a way to fix this problem? Thanks.

[DavidDackMaki]

What about the non-digital model 62015

[Ricky]

These timers have a battery tray design flaw. Once the tray gets loose it resets. It could become loose by the vibration of the water flow. I have 2 and one has a bad battery tray. How do I fix this Orbit?

[calebb]

Say I want to water every 3 or 4 hours starting at 6am will it run every 4 hours all day and night or will it shut off after a certain amount of cycles

[zaynebel-shibib]

I've been using this product for about 2 weeks and it now stopped working correctly. It doesn't shut itself off and just keeps going. I caught it after 45 min of running when it had been set on a 10 min cycle. The troubleshooting guide says its because too many zones are set, but this is a single zone timer.

[stephencaramenico]

I purchased this timer. Put brand new batteries in and it keeps saying low battery and shuts off. Please help?

[Jonhawblitz]

I’m trying to use this as a one time watering timer. Ive set it to “once” then set the duration to 30 min. But it doesn’t turn on. How do I fix this?