Klx110l TB Big Bore and Cam Install

[RonaldBianchi-gdxn]

I've been keeping an eye on your channel seeing if there's been any updates. I as well Want to put a cam in my 110l But after seeing the Tb Cam giving you troubles. I having second thoughts 😕 And I am with you. I'm pretty sure A BBR Cam does not exist 4. A 17 and up. Lol iv never seen one in stock any were. I like what you do keep it up have a good evening

[dillanthomas-seiler]

You can still get power gains from just a carby, I’ve herd people say you can feel the difference like not a huge difference but it’s noticeable

[dikkmgs]

sounds good glad they are able to give some different specs just trying to help tdc comp stroke valves should be at there lowest good luck hope all is well

[Dirtyfish_]

A lot better I knew I made the mistake of putting cam in correctly but not keeping the b on the right until sprocket was at mark then bolted it up. Was real rich before and now the tip of my plug little white possible lean. Thanks for the help. But that tics annoying .002-.003 hope that’s not to tight

[TeamhuskyTeamhusky]

i’m doing this tomorrow first time ever touching the motor 😅

[RYNP]

The decompression cam is to help the starter motor.

[Rust-eze]

Your valves definitely sound a little loud but should get quieter when it warms up. Did you set the clearance on the valves to 0.003” for the new cam?

[DerekMantei]

So which is it!? Does the cam gear mark point towards the front axle or the rear axle?!? You couldn’t have possibly made that aspect of your video more confusing…😂

[Dirtyfish_]

put the performance cam in and it’s giving me a nasty tick. I’m at tdc at 9 o’clock she tevs up sounds good little rich but my exhaust is getting hotter it seems then normal to ware it’s burning my header wrap Motor is hot hot on 10 min warm up and little wind out would one tooth off maybe cause it to get this way? How are your valves after adjusting .002?

[Dirtyfish_]

Gopowersports has a 22. With out the manifold. Would that bolt on to a stock one? Or which one you recommend

[c_]

What torque did you do on the head studs and those 2 bolts next to the cam gear

[WestHaddnin]

Hey bro can you help show replacing electric motor on klx110? There’s no videos on it

[nate]

hey what main jet and what pilot jet do you have in this? also how many turn out is your air fuel screw at?

[Dirtyfish_]

Naw I mean for purchase I seen the 24s and the 22 are chinA

[Dirtyfish_]

I don’t see any 22s only 24 I would have to deject compared to stock

[jonathanmiculka]

Dudes letting fuel go into the head!!!

[deuceninelife]

I have a klx 110 04 with a big bore kit on it burning oil can I use valve seals from a stock bore size kit on my v2 race head

[ravenwear]

@10:02 get your damn seat out of the way, give those precision internal parts some space.

[JesseLombardo-no]

any problems running the pitcross tires on stock?

[wolf_pak_]

Put the rings on before putting on the rod. 😂