First Thing To Check With Low Pressure On One Side Of Your Faucet

preview_player
Показать описание

(Amazon Affiliate link)

Did Our Video Help you? Please Consider Helping Out the Channel

We love helping people and hope that we are doing that!

Guitar Clip by Audionautix is licensed under a Creative Commons Attribution license
Рекомендации по теме
Комментарии
Автор

Love the real time troubleshooting....thanks!

leedun
Автор

Ah thanks this is so helpful for me the woman to attend to plumbing alone properly. Cheers

ll_distribution
Автор

You nailed it! Thank you so much for this helpful video. Yes, count me as a Kohler customer who has this problem.

melissaallinp.e.
Автор

Actually, that turned out to be an excellent video; it taught us not to assume our supply line in still 100% flowing. In my case i wondered why the cold tap was slow: when the furnace man put in the air-return duct he "hid" my poly-B valve, and must have rubbed it to 45 degrees (half off) ! Thanks!

kmilton
Автор

This is exactly what I needed thank you

Dreamsfortears
Автор

Thanks for the tips Brian! The install that you completed is still going strong! No kinks here!

susanseymour
Автор

Love this channel and the comments. Im a rookie trying to make a living. Definitely a go to for me

evansims
Автор

Very well presented, clear instructions and nice live recording. Schweeet !!!

SherodLaLiveres
Автор

Definitely love the headscratchin trouble shooting style video brother cause that’s where it has to start and is the hardest part most of the time

stevesproul
Автор

My master bathroom sink faucet has had low water flow from the cold side since I moved in. When I tested the supply line a bunch of dirty water gushed out. I had to clean the faucet's screen too. I think my city has turned off the neighborhood water several times, even before I moved in, to build out the water lines for 2 adjacent developments being built. I think when the water was turned on, the pressure removed gunk from the pipes. Now I just need to determine how to reduce the amount of time it takes for hot water to reach the kitchen and hallway bathroom sinks.

caseyhartman
Автор

Another step that could be done while the line is disconnected, back flush it. Put a container under the line with low pressure, remove the aerator and cap it, open that faucet control, then open the faucet control that is working properly. Anything that was between the supply line and faucet should be washed out. For capping the faucet some people use a coin, I have an extra aerator that I put a small piece of plastic I trimmed to size and a rubber gasket.

kenlee
Автор

Thanks for sharing! My rental kitchen faucet has no hot water; bathroom is fine, so I know it's not the water heater. Looking forward to trouble shooting [not...] This is helpful!

sharit
Автор

Any tips on how to do this with a single handle faucet

travelndan
Автор

Brian, I recently had problems with the Kohler back braided supply lines, ... brand new, I used extreme care while trying creating a loop, ... I just think the black supply lines are poor quality

normrodriguez
Автор

Is that a Pfistter faucet? If so, it has a lifetime replacement warranty. Maybe Kohler has similar warranty.

ForgetU
Автор

Around 4:15 it appears the black line is kinked.

donsmith
Автор

Great video Brian, I always love it when you have plenty of room like that to use wrenches 😂. I wonder what was blocking the flow it didn’t look like you got any trash out?

brittblanton
Автор

hmm maybe you just unkinked it moving stuff around

ranger
Автор

I couldn't see, was that tee bull headed?

FixitRestoreit