How to Replace Front Wheel Hub Bearing Modules 1994-1997 Honda Accord

Показать описание

Buy Now!

This video shows you how to install a new wheel hub and bearing on your 1994-1997 Honda Accord. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

Estimated installation time for a professional technician is approximately: 1 hour 54 minutes

This repair was done on a 1995 Honda Accord LX 2.2L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
1994 Honda Accord
1995 Honda Accord
1996 Honda Accord
1997 Honda Accord

Tools you will need:
• 19mm Socket
• 30mm Socket
• Acetylene torch
• Press
• Side Cutters
• Air Chisel
• Brake Parts Cleaner
• Copper Anti-Seize
• Liquid Thread Locker
• Rust Penetrant
• Safety Glasses
• Sandpaper
• Water
• Hammer
• Punch
• Rubber Mallet
• Vise
• Wheel Chocks

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.