Most common fixes for broken garbage disposal | How to fix DIY

Fixing a broken garbage disposal can often be straightforward if you follow these common troubleshooting steps:

Check the Power Supply:
Ensure It’s Plugged In: Verify that the disposal is properly plugged into the outlet. Sometimes, the plug can come loose.
Check the Circuit Breaker: A tripped circuit breaker can cut power to the disposal. Locate your home's electrical panel and reset any tripped breakers.

Reset the Disposal:
Locate the Reset Button: Most disposals have a reset button on the bottom or side. Press it to see if that restores power. The button is usually red or black.

Clear Clogs:
Manual Inspection: Turn off the disposal and unplug it. Use a flashlight to look inside the disposal for any visible obstructions like food scraps or foreign objects.
Use a Hex Wrench: If the blades are jammed, insert a hex wrench into the slot at the bottom of the disposal (if equipped) and manually turn it to dislodge the obstruction.

Check the Flywheel:
Remove Debris: Use tongs or pliers to remove any debris that may be stuck in the flywheel. Avoid using your hands to prevent injury.

Test the Disposal:
Turn On and Test: After clearing any clogs and resetting the disposal, plug it back in and turn it on. Make sure to run water through the unit to help flush out any remaining debris.

Inspect the Disposal for Leaks:
Check for Leaks: Look around the base of the disposal and underneath it for any signs of leaks. Tighten any loose mounting bolts or connections if necessary.

Examine the Blades:
Sharpness and Movement: Ensure the blades are not dull or stuck. If they’re not moving freely, they might need professional sharpening or replacement.

Clean the Disposal:
Routine Maintenance: Occasionally clean the disposal by grinding ice cubes or citrus peels to help remove buildup and keep it smelling fresh.

Consult the Manual:
Refer to Manufacturer’s Instructions: The user manual may provide specific troubleshooting steps and maintenance advice for your particular model.

Call a Professional:
Seek Expert Help: If you’ve tried these steps and the disposal still isn’t working properly, it may be time to call a plumber or appliance repair professional. There could be more complex issues that need expert attention.

By following these steps, you can often resolve common problems with a garbage disposal and get it back in working order.

[JTheProcessor]

You are a lifesaver! The little breaker button was popped out on mine. Had no idea that was there! Thank you so much!

[shubhendrashubhendra]

It literally was this button. Thank you 🎉

[aaronLB]

You helped me fixed my problem in less then 1 minute, thank you sir

[sazoned]

Thank you for the help. i managed to get it fixed. You rock!

[noelparker]

THANK YOU. Saved me a panicked, embarrassing (and expensive!) call for a plumber. Had a metal measuring spoon wedged under the blade...two manual turns in the opposite direction dislodged it 🎉

[sweetyonee]

Thank you so much, it was the breaker!😅

[Blueexo]

Just move to a apartment for the first time the the garbage disposal’s got clogged n I pushed that button and unclogged it BIG THANKS 👍🏻

[carolbishop]

Are all the wrenches the same size because when I put the wrench in the hole it doesn't fit
too big?

[tonjaval]

It seems to have tripped a breaker. Thanks for the help

[VickersJon]

Also try unplugging and plugging back in. That worked for me.

[aron-c]

Little red button, after pushing, had gone deep inside. What now? And the mid thingy that I'm supposed to turn? It's gone after turning few cycles, not sure it had sunk deeper or somethin.

[Claritin]

Thank you for this, just fixed mine 🤝🫡

[carolbishop]

Are all the wrenches the same size because when I put the wrench in the hole it doesn't fit
too big?