41431: myTouchsmart In-Wall Timer Installation and Operation

preview_player
Показать описание
Рекомендации по теме
Комментарии
Автор

Excellent video however, one suggestion, please cut out the very annoying music- it is very distracting and annoying.
Thank you for very good instructiongs

MrRockend
Автор

What do you do if you don't have a green/ground wire in the existing box? There was a previous timer that didn't need/use a ground.

spencermiddleton
Автор

Does the neutral wire go in to the traveler port?

ckizzle
Автор

When I have installed two of the timers on seperate curcuits ( same panel), but when I have the first one installed ( it is working fine) then install the second timer the first one stops working. It knocks out the first one completely to a point that it doesn't work at all ( I need to send it back). I have had a electrician look at this and
all the wiring is correct. What is making this happen? can I only use one of these in the house? Thanks

kellyoldroyd
Автор

Hi. I only have 2 wires. On the old switch, how do I get the neutral? Thanks

SaludyBellacom
Автор

Obnoxious background music; tone it down please so we can actually hear the instructions:)

davesmith
Автор

How long does the backup battery last?

mpharr
Автор

Can this be used to control a bathroom exhaust/light combo separately? I have a 3 wire plus ground.

MrDirtyDezzy
Автор

I think I got everything correct as instructed. All working ok except my on/off switch when turn on everything blinks light 💡 included. What am I doing wrong?

joeb
Автор

I have installed, pressed the reset. display came to 00:00 set the time. Set on time and off time, LED's did not light, pressed manual on and light did not come on. Check power supply with meter and power is coming into device. What is wrong ?

waynemortensen
Автор

My on/off times and programs have worked correctly for some time. Now the My on times will not light blue or respond to programed My on time for connected light. The My off lights and the manual on-off blue lights work properly. I have reset and reprogrammed but My on time blue lights do not come on.

wqlnfuh
Автор

Great instructions, but you spoke too fast. I could do without the music. Thanks you

catarinaalmeida
Автор

Hello, i only have line, load and neutral wire but no ground wire?

gurbinderdhillon
Автор

Saludos compre uno pero estoy confundido load y lines . Ayuda por favor . Mil gracias

betomarin
Автор

Who did this video! You should be fired because I can't hear the person speak over the Uber loud elevator music

TomHallhomebuyingokc
Автор

so i'm pretty good with home wiring.... service box doesn't have a ground... is that a requirement ? Secondly -- wired everything up line (hot) and load (to fixture) .. neutral to switch and then terminate with all other neutrals .. nothing nno LED's manual not working... I know which black is the hot ... what could possible be wrong ?

jhollister
Автор

I set the on and off times but the "ON" light stays on. If I press off the lights go out. Is the On light supposed to be on during a cycle when times are set?

mkay
Автор

I only have 1 white, 1 black, and ground. help!

Itsmarkmiranda
Автор

I don’t have a neutral wire. Can I not use this device?

JaySyke
Автор

Well done video but the music darn near overpowers the narration

tomking