LDO Voron Trident After 7 Months - Should You Buy It? | #3dprinting #voron

[mitsubishimakes]

I wasn't gonna comment but I like your cat

[brendanm]

It's a beautiful build! I like the color combination you've selected.

I think your noisy AB steppers could boil down to the fact that they're .9° rotation per step versus the more common 1.8° rotation per step. I've got a 250mm spec Trident with the cheaper SteppersOnline 1.8° motors, and it's been pretty silent. The Hot end and Part Cooling fans are _far_ noisier than the steppers are.

My Trident has been a very nice upgrade from the old Flashforge.

[WINTFOX]

Glad my mod helped. Very nice build :D

[hobbyistnotes]

Nice video, I definitely have spotted few mods that I will do cus of that video.

[RedsDPrinting]

badass that you won it! gooals for sure

[nevets]

Great video, good content and informative 🎉

[Kotaztrafee]

Currently using a QIDI XPlus and was considering a Voron for two reasons. #1 Open Source. Getting parts from China takes at least three weeks from QIDI and that is the only place to get them. #2 is because I am getting ringing around my text. By slowing down and using jerk and acceleration setting I can reduce it but it won't go away. So I was considering a Voron because it is hailed as a sturdy machine. However, I see on your test cube that you have as much or more ringing than I do. Perhaps you were not concerned with that as was running at high speed because that is standard by which printer seem to be rated these days. I'm printing ASA at 50mm/s but even at 30mm/s there is ringing. So, bottom line I don't see that the Voron is any better than the QIDI as far as ringing is concerned.

[retroluminico]

Beautiful machine. I have a doubt: Those shock absorbers on the stepper motors won't cause unconsitencies on the motion system?

[Chispolas]

Hello! I am currently building a Voron Trident printer and wanted to ask... does this mod really work? I have seen that there is some mistake in the installation guide, like one of the m3x30mm screws is a bit short. What is your experience after all the time you have been using it?

[torquemada]

LDO 0.9 steppers are incredibly loud. I upgraded a Taz 6, and the 0.9 steppers with TMC2209 drivers were louder than the stock steppers and non-silent drivers. I honestly wish I left the stock stepper motors.

[jeffmcclain]

I want to know more about that internal spool holder. I didn't know there was enough space to fit a 1KG spool?!?!? But it looks great!

[KolMan]

Should upgrade the toolhead or add aux cooling. Stealthburner is terrible for cooling and weight when you really want to go fast.

[dkgoodrich]

Get rid of the stock main board and you’ll watch most of the stepper noise go with it..

Octopus pro boards and motor tuning were the best things for my Vorons, when it came to stepper noise

My 2.4 is more quite than my bambu p1s, at 700mms and 30k

[bolarsen]

Great video, do you have spider v2.2 ? need help to upgrade klipper mch

[Muddles]

I’d be interested in what fan yours came with for part cooling. My first fan that I used with stealthburner was subpar, but then after replacing it with the one recommended on the discord, I had to turn down the fan or else it would over-shrink my parts.

[htw]

I see every now and then, is it worth buying a Voron? Should you buy a Voron? (2021-2022-2023), every time the same question. In my opinion, it's a YES. For one simple reason. Voron printers-models are upgradeable. Every 3-4 months something new is coming so they implement it on their models. This could be for fun, quality, speed visual effects etc... As an example i will say: look at the first voron and now look at the r2.4. This is evolution. Nice video by the way/ Love the colors and your mods. Can you share some info about your tft screen?

[peterlakos]

Hi! This is a very nice build for sure! Is this a 250 or a 300 mm version?

You actually done quite a few mods that I'm planning to do. Did you follow any installation guide with the umbilical or did you figured it out on your own? Especially on the A drive side, I could see on the video that the toolhead is done with the BTT wire holders.

Thanks!

Peter

[MidMadn]

Are you running your motors in stealthchop or spreadcycle mode? Stealthchop is noisy as hell. You should make sure they are set to spreadcycle in your printer.cfg.

[Shint]

Do you have a link to that internal spool holder? I'm using the horseshoe one but its chewing up my cardboard spools

[Basement_CNC]

well thats the reason i havent got a trident or 2.4, i WANT one, but i dont print that much to justify a 3rd printer (have a prusa mini &V0.2), nor do i print big models (95%fits on the V0) nor do i have enough spare money to buy one, id rater spend the 1300€ elsewhere😢

but if i ever have a acsual teason that the" i want" changes to "i need" yeah sure ill build one, the v0 was easy and fun😂