Watch! The FASTEST 3D Printer I Own! FLSUN T1 Delta

UNBELIEVABLE speed out of this T1 delta 3D printer from FLSUN! I hope you enjoy the little speed demo, I had a TON of fun making this video... and this is now the fastest 3D printer I own!

Some of the links shared in our content may contain affiliate or promotional links where we may receive compensation through your use of them. Thank you for supporting our content!

FLSUN T1

I am incredibly fortunate to have Polymaker as my official sponsor! Using my affiliate link is a fantastic way to help support our content!

Did you know that I am LIVE on Twitch 3x a week (Mon/Wed/Fri @ 5PM Pacific) where we nerd and geek out about 3D printing for HOURS! Oh, and we also have sponsored giveaways EVERY SINGLE SHOW! Come by, say hello, we'd love to see you there.

Also, we have one of the ABSOLUTE BEST 3D printing discords that have ever existed! An incredible, thriving and supporting community with weekly contests and giveaways as well as support channels and so much more! I do most of my announcements there as well, so you'll want to join for sure!

We have the BEST sponsors for our content, take a look at these amazing companied who regularly sponsor our content here on YouTube and other platforms!

Bambu Lab

Gloop!

Micro Swiss

Slice Engineering

LDO Motors

Vision Miner

#3DPrinting #3DPrinting #FLSUN

[LoyalMoses]

FIRMWARE Update for v1.0.5.4

Received this from FLSUN just moments ago. As I mentioned in the video FLSUN has been VERY responsive and is committed to producing a quality machine.

---

Here are FLSUN T1 Firmware Version V1.0.5.4 update instructions, online upgrade is available.

1. Optimized system files to significantly increase available storage space.
2. Enhanced the time-lapse photography function and fixed the issue of generating time-lapse
videos abnormally.
3. Fixed the potential clogging issue during filament retraction.
4. Improved the heated bed leveling function.
5. Enhanced power failure recovery functionality.
6. Improved the usability of the pages and the ease of flipping through them.
7. Optimized the startup wizard logic to reduce the time needed and enhance user experience.
8. Fixed the issue where the camera might not be recognized when plugged in or out.
9. Resolved the problem where printing could fail if the file name contained certain special characters.
10. Fixed the issue where the printer would not automatically turn off the screen or could not wake
the screen after it turned off.
11. Resolved the issue of incomplete display of some UI content.
12. Fixed the issue where the nozzle did not automatically cool down after pausing printing. Now,
the nozzle temperature drops to 90 degrees after pausing.
13. Fixed the issue where WiFi did not automatically connect after startup.
14. Resolved the issue where filament loading and unloading were not supported during printing
pause.
15. Other known issues fixed.

[gamercarter]

Now I want a delta even with all the printer looks like a beast!!!!

[colemanwalker]

Right out of the box the touchscreen screen doesn’t respond.i haven’t been able to get into the main screen and I’m stuck at choose your language can you please help me fix this problem?also i already contacted support

[sledlord]

I have the S1 and have not noticed the z drift. Bed adhesion, I never had a problem because new out of the box I washed the build plate and then put vision minor on it :) Fan recommendation, it doesn't need to be 100% all the time, I bump it up on short layer times and overhangs. Makes it much more tolerable.

[TheGeordietheWitchandtheWench]

Yeah... Delta's rule... They just make so much sense!!

[snsta]

So far for multicolor I go to my P1s and for speed I use my Flsun T1.

[db]

I have had my eye on the V400 for a while now. I think the difference in speed and noise is the deal breaker on this one for me. I have a bed slinger and corexy, so I want to experience the delta next. Just a matter of budgeting for it. Great video though, especially since the other videos I have seen never explained the coned Z volume principles of these machines.

[Mildly_Amused]

I wouldn't give them any money until they actually fix those software/firmware issues. Another one of FLSUN's printers has the same issue and it hasn't been fixed yet.

[GabrielPalileo]

Hey LM and team! As always, love your energy and the quality of content that you put out! I will say, like a lot of other printers that have been released lately - I still think that this machine is not fully ready, and falls into that category of "hype up and underdeliver" that a number of 3D printing companies have been doing as of late. Again, I understand that this is your livelihood - but perhaps a few more disclaimers that consumers should wait before issues and profiles are resolved (which should honestly come BEFORE a printer release these days, but hey). Anyhow - keep it up!

[jucream]

Thanks for the detailed video I am considering to get a T1.

[hostedposted]

Your video convinced me to buy this printer! And it was printing great! However, after 50 print hours, there was an abundance of stringing that wasn't even fixed by drying the filament/swapping the nozzle/or slowing the print down. This was with PLA, and with the same filament when I first got the printer, there was no stringing at all. Any tips on reducing it?

[dmhayes]

Really great video and editing quality! It's super awesome to see the improvements over time.
I've watched a few other reviews of the T1 and most have been pretty negative. I think they may have been a bit biased. Thank you for the honest review!

[FieldsHenry-vx]

It really looks like a cheetah. I really like it!

[satibel]

I got it brand new for cheap from a guy who's wife wasn't happy with his 6th printer, it's insanely good, it's slower than my m5s with high speed resin, but way less of a pain.
it chugged through terrible ABS (bought if for 6 bucks a kilo like 8 years ago, and the roll I tried stayed under a window), it prints no issue with no brim just glue stick (except it waiting for it to get to temp if I set a different temperature so I have to specifically slice for abs or put it on the default temp, and quickly pause after it starts to set the correct temperature (especially annoying because I have to wait for the bed to come down to 60 then back up to 100C).)

[tomyocom]

Have Predator and Mini Delta. 370mm with 450mm Z... nice. 2019 it must be the grandfather of t1 and the v400 is nearly identical with 2 or 3 upgrades. Deltas are true robotic creatures and mesmerizing to watch. Of course I have Prusa and Bambu as well DLP, SLA Resin Printers. Micro to Macro prints!

[MrBaskins]

love delta printers so much. i get wrapped up looking at em

[earlowens]

Thanks for the review! I want a delta! I learned lots. I’m just a hobby guy who’s retired so I have no business aspirations. That said, printers are just interesting toys to me.

[RWHobbies]

I had a K1 Max a year ago and sold it as it kept jamming. I see the P1P is on sale right now for $449 (only $100 more than this when you add their tax and shipping), so p1p seems a better option that this? I want to do helmets and stuff

[ucantsee]

Wow good price. Love the video. I bought a 50ml bottle of Nano. Excellent stuff.

[nigel]

they change the slicer it now based on orca slicer