Configuring Cisco 220 Switch

This videos shows how to perform a basic setup of a Cisco SB switch. One thing missing from the video is how to change the management VLAN. The command for this is "management-vlan vlan 168". The command changes the vlan to 168, which was the vlan my access ports were set to. I got away with not doing this in the video, because I was access my switch from the trunk interface, which included vlan 1.

[mahuubao]

Excellent ... well done ... all what you need for Basic-Installation ....

[joshbigz]

When I unboxed my Cisco 220 Switch I found I could not connect via the console port. It took me a long time but I figured out that the baud rate was not set to the Cisco default of 9600. Instead the default was 115200. if you cannot connect via the console port try changing the baud rate to 115200.

[geraldvalguna]

Hello, thanks for this content.

I'm trying to connect a phone and then a PC (cascaded manner) in single switchport.
is it supported by this switch model ? I don't find a voice vlan command under the switchport config.

Thanks in advance!

[angelakariuki]

Do you use the dashboard or does that require a license?

[ezea]

How can I put an ip to a vlan to manage it either by telnet or web

[__Feniks__]

web interface ?
No I haven't heard !!!