OnePlus 7 Pro Charging Port(USB Port) Replacement Guide

This video shows you how to replace the broken USB port of OnePlus 7 Pro.

The USB port of OnePlus 7 Pro can get broken or ineffective because of unsuitable operation and long wear. This video shows you how to replace and repair the broken charging port of your OnePlus 7 Pro. The operation helps you recover, effective charging and smooth USB data transfer of OnePlus 7 Pro.

Tools:
1. Heat gun / Hairdryer
2. Phillips screwdriver
3. Suction cup
4. Plastic card
5. Ultra-thin plastic sheet
6. Screen Adhesive
7. Battery cover adhesive
8. Tweezers

Don’t forget to Like if this video helps you.
And don’t forget to SUBSCRIBE!

Witrigs offers not only mobile repair tutorial including disassembly, assembly, and components replacement guide, but also phone accessories review video on YouTube.
If you are interested in DIY phone repair or latest phone accessories review,

[joshuahoover]

Amazing instructions! I was skeptical to do this but followed these steps and my USB-C port is replaced and working properly again, complete with warp charging. Thank you!

[atigerbear]

it worked for me :) charging isn't like a game of operation anymore.

[colmf]

Well done, unlike a lot of other channels, you carefully discinnected the laser focus cable, two of the most pop U tubers did not

[rockobonaparte]

It looks like I got my USB port replaced too with these instructions. I'm not sure if the highlighted screws at each step are actually consistent with what I was getting. I mean, for stuff like that, I normally take pictures with my cell phone as a I go, but that was kind of a problem in this case! One gotcha I had was inserting the bottom board that has the SIM card slot. That has to be angled in, with the board getting under the tab on the case. A smart thing to do before putting the whole thing back together is to try to insert the SIM card and see if you lined it up.

[sebastienmella]

is this the same for the 7T pro, specifically the usb port part?

[NerdBrainDk]

Sorry if its a dumb question. But will this replacement, delete all the storage and apps?

[Alexander_MM]

Be careful when returning the sim card board, make sure the sim card slot is not skewed. The same when installing the plastic cover, the same board, it has hooks, before tightening the screws make sure they are all in place, or you will have to redo it. This is what I encountered and what was not emphasised in the video.

[BrilexLaAuthority]

@witrigs do you have that part for a Oneplus 7T Pro Mclaren?

[iliasha]

Hello thx for Video. Cam u Tell ne where i finde the harddisk on this phone

[tariq]

I did replace yesterday the USB Port and battery and I would suggest that after reassemble bottom board before put black cover make sure SIM tray can be inserted into its slot and its level.

[austincain]

I just did this and the battery I followed both of your videos to do it thank you and next is my screen

[travisharris]

When I removed the bottom board that covers the screws on the port, a tiny little black post with a red gasket fell out. It is about the size and shape of the screws but maybe 30% longer.
The gasket is the same color as the ones on the sim tray and speakers.

Do you have any idea what this is and how I can replace it properly?

[RobbieRobski]

Will this solve the the cable not staying in the port? Mine works fine, but it slips loose while charging so it's a huge pain in the butt.

[solson]

Thanks for the video. My usb-c cables have been falling out and won't stay connected very well for as long as I can remember. I have to carefully plug it in and set it to where there is zero pull or tension (even the slightest) on the cable for it to stay charging. Vehicle mounts are a no-go as the cable will just fall right out after a few seconds. I don't now how it got like this because I've always been so careful plugging in and unplugging all of my devices since...ever. In any case, I now have my charging port ribbon/cable and new battery replacement and I'm going to attempt to crack open my OnePlus 7 Pro in the next few days and do the replacements. Fingers crossed!

[aniketsonawane]

Does one plus service center do this or they ask to change motherboard ?

[clemjb]

Thank you, for the parts and the information. Very well done video.

[AydenTheKilla]

Awesome tutorial. And at least i dont have to solder anything lol.

[차성환-cg]

I have a terrible issue that not connect to pc.
It suddenly appeared. I found the same issue through other user in Oneplus community.
- I tried to connect in win7 and win10.
- Of course, I installed the usb driver that you provide.
- I used the original cable for connect the pc.
- But, The phone detected the only charge mode.
- If i remove and plug in the cable from phone several times, it sometimes connects properly.
if i replace the charge cable, Can i fix it??

[willgamer]

good night changing it is necessary to reset the cell phone?

[janekflemyng]

Do you need to buy new adhesive for the back cover? Or can you refuse the old?