Some Simple DIY Tips for Wall Plugs / Anchors!

Welcome back to the Gosforth Handyman Tips Library! Today I'm giving you a few simple tips when using the humble yellow, red or brown wall plugs / anchors. These are only for if you're using these plugs in solid walls. I'll do a separate vid covering hollow walls, dot & dab and thermalite / aircrete. Remember you want to pick a screw length to ensure full contact with the plug throughout it's length - so bear that in mind. Obviously that will depend on what you're attaching to the wall. Always follow the manufacturer's maximum recommended loadings.

VIDS YOU MIGHT FIND USEFUL:
#71 - How Strong are Red Wall Plugs?

#65 - Drill Dust Catcher

#156 - Red vs Brown Wall Plugs

#193 - Fischer DuoPower Fixings

#151 - Using Wall Bolts / Shield Anchors

#78 - Avoiding Pipes & Cables in Walls

Once you're finished on YouTube here's an article with more in-depth information including links to buy these fixings:

#DIY #Anchors #GHTL

[LuisNeves]

Started watching without much expectations ... and actually learned a LOT. No wonder you have so many subs. Even on "trivial" subjects you extract gold for people that are no newbies. Very well done !!!!

[fontybits]

For many years, I worked for the Rawlplug Company.
In the R & D Department within the factory, a 1 ton block of concrete was positioned in the middle of the floor.
A small hole was then drilled in the exact centre of it and a red Rawlplug tapped tightly into the hole.
An eye-hook was screwed fully down into the red Rawlplug.
A portable crane was then used to lift and suspend the concrete block approximately 20 mm off the floor.
Visitors were always shown this feat of strength of the Rawlplug.

[MartiA]

Never cease to amaze me; been using this sort of stuff for YEARS and yet Andy can still show stuff in a different light. Brilliantly done!

[strandloper]

When drilling into a plaster wall the hammer action tends to cause more damage to the plaster so I like to leave the hammer action off while going through the softer plaster and only turn it on when I hit brick hard enough to need it. Sometimes you can go deep enough for the plug without needing it at all. It's also easier to stop the bit from drifting when starting the hole without the hammer action.

[RubberRivet]

Every day's a school day, I'm in my 60's, never thought of yellow in red or two in line. Thanks
.

[Alex]

Thank you for making this video. It answers so many queries where I’ve just guessed on past projects without really knowing what sizes for wall plugs, screws, drill bits & correct uses and hoped for the best. Subscribed 👍🏼

[mariosavva]

This video was very helpful considering my house is all concrete. In fact, all your videos are very good. Much appreciated 👍🏼

[maranellomania_Photoshop]

If you are just starting out on your DIY journey then watch this video! Great explanation of correct use of both basic wall plugs and drill bits - thank you.

[btwfbtwf]

Just to echo other people's comments. A great video, wasn't expecting much but learnt a lot. It was presented with clear imagery, good narration and explanations - I've subscribed

[strandloper]

The old school way I dealt with oversized holes when bigger plugs were not available was to force one or more match sticks into the hole alongside the plug. Worked well enough.

[nowthenad]

I love this video. Most people wouldn't think to explain all these different scenarios in which difficulties can arise. I love the level of detail here. So, you can only carry so much stuff around on your jobs, especially when you always carry around the essential framed photo of His Royal Highness (RIP).

[kagelevelofficial]

Awesome thanks for this! Made a bit of a mess when installing floating shelves and felt not so good but this has been useful! Fingers crossed now, feeling positive

[specialeffectsgraphicsdesi]

"I know in America you call them anchors or something WEIRD like that" 🤣😆👌🏻👍🏻! Great video. Learned a lot as a beginner.

[adamanthony]

Totally useful...for a novice..a great watch on Sunday evening.

[tubro]

Excellent that you take the time to explain and display the basics. Very useful to learn for the beginners like me.

[ocdtechtalk]

Finally someone who understands HOW things work and just doesn't bang it in. So many trades by me just bang it in and then are surprised when it fails.

[mikeykeyes]

Mate so thrilled to see the Indian tri-colour in the company of the commonwealth! Good on you. Thumbs up just for that.

[ttsstt]

One of the best bids you have done hands down

[derekjohn]

Excellent video, so much useful information and clarification of plug & screw sizes. This has just solved several issues for this beginner DIYer. Thanks!

[johnduerden]

I've been doing building work for almost 3 decades and I've never thought about putting a plug in plug, I would normally put splinters of wood if hitting a mortar line.