3500 Chevy P0300 code

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

Check for a vacuum leak around the intake along with the pcv hoses

jordanpowell
Автор

If you have High miles do a leak down test first before throwing parts at it.

danielortega
Автор

I'm with ya... same issue... working on injectors replacing soon...

SuperVstech
Автор

You have to check out for a ground problem cause 10 out of of every problem, Ute you got a ground cable ain’t make a contact put a new ground cable on it the black wire that plugs into the coil pack the big gray one you have to hook a ground wire to the black wire in grounded to the frame

timwilliams
Автор

All the connection and all the connect there’s for the injection along with the firing and the spark plugs but what you need to do is change your intake, manifold gasket, both of them of it that’s all it needs

isadhamid
Автор

you should find out what cylinders are the one that are miss firing first then do a cylinder leak down test before replacing parts that ain’t needed and go from there miss firing can be caused by several different things but I would figure out what cylinders are causing you the trouble first. You can also do a compression test

Coloniero
Автор

Vacuum leaks, check the EGR valve and intake gaskets

Brian-piyf
Автор

Wires can be cracked around connecters

pops
Автор

O2 sensor bank 2 sensor 1 right before the Cadillac converter

ubettershutuptj
Автор

Have you done a timing chain or belt? stretched timing chain, or belt can cause this code but usually only arises after 150, 000 miles or if driven very aggressively

alexisrodriguez
Автор

My 07 Chevy Silverado doin same thing they told me to change all my fuel injectors so I’m on dat now to see if it fix the problem

lovedestinyfr
Автор

im with ya same issue i dont i chech everything i cant find it 😢

santiagosbodyshop
Автор

I had no issues with my 06 and I changed plugs and wires.. as soon as I fired it up it ran like shit.. checked everything.. double checked everything.. no clue..

lostinsperry
Автор

O2 sensor or electrical ground or clogged fuel filter

Alanthemobilemechanic
Автор

The piston with most misfire the valve on the head is leaking air out the tb òr tailpipe do the test with piston topped.u rings are probably ok so its the valve the head needs work

kennethsouza
Автор

So no update with fix? Or did you kust say fck it?

articulatingprimate
Автор

It could be a rocker arm go e bad or even a valve, bad gas is an issue too throw some octane booster or heet in there, if not could be mechanical

Broman-essx
Автор

Should be running ac Delco double platinum plugs.

eus
Автор

So what was the issue ? Please tell me I just wanna know please I replaced all the things you said in the video but now what was that last thing you replaced that fixed it?

beptex
Автор

Need to perform a crank relearn procedure

airplaneeverything