BambuLab vs Creality vs Qidi Tech (K1 Max, X1C, Vs Plus 4)

——————————————————————————————
DISCORD & PATREON:
——————————————🛟——————————————

——————————————————————————————
# CHANNEL LINKS & DISCOUNTS:
——————————————🛍——————————————

• 5% OFF - Everything from IIIDMAX using code “3DPRINTSOS”:

——————————————————————————————
DISCLAIMER:
——————————————⚖️——————————————

Some of the links above are Affiliate Links. They do NOT cost you anything but using them and making a purchase provides a tiny kickback for the channel. This is one way I can afford to continue to make content for this channel. Thank you for your consideration. :)

[Garage]

Can confirm prints coming off of my Plus4 and those of many users in the Disk-chord are some of the most perfect I've seen come off a stock printer. The precision I am getting is also phenomenal. Print in place bearings all the way down to 0.01mm clearance, yes right decimal placement, without fusing together.

[gregoryamer]

Thanks for the comparison video. It’s good to see a close up.

[fantic]

After looking at initial reviews and the fact it has everything I’m looking for and it’s not a Bambu looks like I just found my new printer :)

[notyouraveragegoldenpotato]

Can confirm. My plus 4 puts prints out the likes I didn't even THINK was possible. And it does it FAST. It doesnt care if it's throwing plastic at 100mm or 500mm it is CLEAN and ACCURATE. No joke I have never seen a machine that prints more accurately. I can't stress enough- ACCURATE <0.01mm while it's RIPPING fast😂 it's epic

[rescuemethod]

Fantastic! Please check TPU can be one softer durometer and one harder and if possible test varioshore or another foamed TPU!

[irbose]

Awesome! I’m done with Bambus untrustworthy politics

[oldsaltyd]

All of these defects can be fixed within the slicer, it's not because of the machines printing abilities. The issue with the curling isn't because of the X1C capabilities, I print ABS constantly on my X1C and hardly ever see any curling, my chamber temp stays around 44c and I use a Textured PEI build plate with a bed temp set at 90c. VFA's can be eliminated by slowing down your print speeds. All three machines are capable of printing outstanding ABS prints.

[TTS-TP]

All of the shit that they get, Qidi has been good to me ever since the OG Max. I've always bought through their Shopify and had the two year warranty and support, and they still Provide support for my plus two. That machine has printed so much Asa, I couldn't tell you the hour count. Runs beautiful with octoprint and some chitu mods. The x-maxx with the OEM upgrade Prints PA CF and GF like a champ, just still not better than my custom builds

[willofthemaker]

Waiting for parts to come from China so I can finally make a print on my plus 4 😢😅

[gabenite]

After I printed and installed the aux fan deflector I've had zero curling on abs without heat soaking either

[iwandrakonpl]

Im looking for a printer with consistent quality prints. I love the comparison youve done here. If you were to choose between bambu p1s and qidi plus 4 (print surface quality wise), which one woild you choose?

[coledavidson]

Too bad about some of the Plus 4s having electronics issues. Hope they get that sorted and release a new batch

[theFPVgeek]

Would love if you added the open source contender as well (Voron Trident or Voron V2.4) :)

[toolsandmoreinelectronicsa]

What material and settings you have used on the Qidi Plus4 ?? Thanks ...

[helixxharpell]

Qidi should have initiated the recall immediately when they started hearing the issues with the fire hazard SSR board. 😟😡

[sirqazu]

Angle tower, angle test. In which angle there is able to print. Prusa MK4S had 70⁰, I think.

[ThisisDD]

The VFA on the K1Max vs the others. Yikes. Mine look like that too, but worse. Changing to linear rail

[cata]

I have k1 max and has barely visible vfa s, yours is broken, or this is quidi qidi marketing

[lazyman]

Print some small thin tall parts or voronoi one.

[bartman]

my plus 4 have same vfa's like x1c on your video. But I will fix them or force them to send me new one:)