Which 3D Printer is BEST! Creality K1, Bambu Lab P1P or K1 MAX?

So after having these 3 printers for a bit, I've put them all through the ringer! Print after print they're all proved to be true workhorses! So in this video, how about we compare the features and sizes of these 3 industry leading machines and see which one may be best for you?

Enjoy!

▼ MENTIONED IN VIDEO


▼ SOCIAL MEDIA / CONTACT

▼ SUPPORT THE CHANNEL!

▼AFFILIATE AND DISCOUNT CODES!

☞ Check here for Up to Date Discounts and Codes!

☞ Visit Elegoo for my favorite FDM 3D printers, from entry
level to advanced!

☞ Visit Creality for a variety of FDM 3D printers, from entry
level to advanced!

☞ Visit Bambu for a variety of FDM 3D printers, from entry
level to advanced!

☞ Use Code “FBT20” at checkout for 40% off awesome
3D models and files!

☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!

☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!

Disclaimer- This video is NOT sponsored by any brands mentioned in this video. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!

Thank you for supporting me!

▼TIME STAMPS

#3dprinting #3dprinter #review

[brguns]

I need to replace my CR10s for a high speed printer. Since I don’t buy anything with less than 300x300 bed, K1 max is the only option.
Thanks for the comparison!

[lLoneRoninl]

Great review. Nice to see someone actually be honest rather than be a biased bambu fan. Plus not to mention you don’t blame the printers if something was actually your fault. Definitely will be coming here more often. Amazing work.

[gregoryhall]

Congrats on a million! Only a matter of time, you've entertained and helped many people with 3d printing and cosplay! 👍

[dernicolas]

this seems like a fair comparison without too much marketing bs. Well done. :)

[Voxanez]

Got my P1P a week ago and I love using it. Still need to do some tuning and learning to do but that's why I've been binging your videos lately lol excited to print my first cosplay with this thing!

[samjesse]

So excited, my P1P comes in today. Can't wait to start cranking out props

[LegionDPrints]

Recently picked up a P1S for my first FDM printer and it's an absolute dream. Thanks for doing all the reviews it really helped me making an informed choice :)

[michaelparadise]

I cannot wait for your 1 mil live video!!! You rock!! Me and my son will definitely be waiting to see when it comes out!!!

[MrMndon]

You thank us in every video and for me, I thank you. What you've presented has taught me so much that I can't explain. Thank you for everything you do.

[proaudiorestore]

I own the P1S. The only time I use the screen is to turn off the internal light the which admittedly is a bit painful. Otherwise, everything is done either via Bambu Studio or Bambu Handy. The P1S is just a really fast and efficient machine. I have been printing for a long time now and what we are seeing now is almost a revolution in the market. Even cheap bedslingers are giving you great results for very little effort. We are almost at the push print and forget stage. Almost.

[mikemarucci]

My K1 Max was a disaster with bad first layers, tons of VFA, ghosting and ringing...Creality send me a new heat bed witch helped a bit but still crap first layers, so I took things into my own hands. I CADed some bushing to get the bed more level and I went from a 1.2-1.3mm variance to a .4mm and now my first layers are much better. I rooted the machine and did some proper input shaping witch made the ringing and ghosting about 80% better, not gone but better. The VFA got better by doing the Voron belt tensioning method. Also I have switched to OrcaSlicer and that alone helped with print quality. I had a ton of quality control issues from loose connectors to loose bolts and screws. I have 320 hours on my K1 max now and its as good as its going to get with this unit, I'm getting by with it. I have about 100 hours printing ASA and that chamber does get hot, i have seen temps from 50-60C depending the height of the print. I own 3 Bambu printers and 6 AMS units with 1500hrs between them with no issues since day one, just regular maintenance. The K1 Max is no Bambu and thats a fact in build quality, and print quality.

[sjschauer]

I was able to pick up the K1Max on sale and have loved it. The only issues I have had were like yours, user error, and a bad hot end that Creality sent me a replacement for. I love it, probably my new favorite printer. I really only use my Ender-5Pluss now to back it up or even larger parts.

[SupaGEEKDesigns]

Just bought two K1 Max @ $650 at microcenter! Love this printer...

[michaelalanstlouis]

And as for the display on the Bambu P1S, I used it once when I first got the printer to print the boat. Maybe the scraper too. But other than that I just print from the slicer. So the little screen is just fine.

[andrewrushent]

If you hate the P1P interface the community are currently developing the P1Touch add-on for the P1P which adds an additional touch screen to the printer with additional functionality 😊

[mikepowers]

Great video. So close to pulling the trigger on one of these printers. I think I will try my hardest to be a little more patient and wait to see if there is a holiday sale. Congrats on almost 1mil subs.

[fazerhermultuate]

I just ordered a K1 Max. I don't know what I am going to print on it yet but I can see there is a huge library of prints.

[colinmsmall]

It’s interesting as a consumer to come across two videos regarding the K1 Max in a couple of days both from what I would consider to be reliable sources and have the experience and opinions on the device be so completely different. I’m referring to the Galactic Armory video on the K1 Max which I think even mentions this channel in the video.

[aaron_exclusive]

Can’t wait for the live stream man! I’ll make sure to be there :)

[jd]

I just got a k1c and it runs like a champ. Bambu turned me off because of the proprietary components. Creality allows me to purchase cheap upgrades and I’m not stressing if a part gets broken or I need to upgrade a part to squeeze out a few more years out of it. Take all this with a grain of salt my last printer was a ender 3 s1 so I’m really just blown away with how far 3D printing has come I can now print multiple big prints in a day. Prints that would have taken multiple days and of course with heart break with print fails along the way. Zero machine print fails as of now with the K1C a few user errors and that’s it.