Fusion 360 User Interface Tutorial | 2024 Interface

Показать описание

Explore the Fusion 360 interface 2023 to learn where all the design tools are located.
FUSION 360 RESOURCES

TOP FUSION 360 PLAYLISTS

KEVIN’S FAV 3D PRINTERS

_______________________
JOIN THE PDO COMMUNITY

SUBSCRIBE (& Hit the Bell!)

TIMESTAMPS
00:00 - Fusion 360 user interface sections explained
00:05 - 1. Data Panel
00:26 - 2. Application Bar
01:34 - 3. Toolbar
02:18 - 4. Canvas
02:27 - 5. Browser
02:51 - 6. ViewCube
03:19 - 7. Marking Menu
03:39 - 8. Navigation Bar & Display Settings
04:00 - 9. Parametric Timeline

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline

Рекомендации по теме

Комментарии

for anyone having trouble with the speed of the instructions, change it to 75% speed and it will be much easier to follow along. Great content, thanks for the tutorials!

promotosport

Im 16 and want to go into product design when I’m older, this is gonna be a great help to start!

traintimeboy

I really didn't want to stop using Tinkercad because I had figured out a number of ways "around" most of the issues. I finally decided to commit to using Fusion 360 after many false starts. I found that working on a few Fusion 360 projects before watching this series helped a lot. A lot of great tips, and a great overview. I feel like I significantly increased by Fusion 360 knowledge watching all of these videos (on 150% speed).

So I highly recommend getting familiar with Fusion 360 a bit at first, then watch this series. A++!

DrieStone

I love fusion. Just went from free version to paid sub. Well worth it.

PhilosopherArns

What a great find this channel is. I only discovered this yesterday (11/02/2023) and have finished all 9 tutorials watching along. I've started following you and requested to join your Facebook group for the weekly challenges as well. I'll have to catch up with the first ones though. Thank you for putting this up, this has restarted my passion for 3D modeling while learning new software at the same time. I'm like a boy again :D :D :D

noisykittens

Thank you very much for this series and for updating it each year for free!

Pyriscent

You are a VERY good instructor Kevin
It's been 2-1/2 years since I've been in Fusion 360...
You see, I was getting into Fusion 360 and I was moving right along - although somewhat sloppy because I wasn't setting up files the right way...
I just busted right into designing without even using proper constraints sometimes...
Unfortunately I had severe retina problems in both eyes that required a series of surgeries and procedures to get my Eyesite back - it took almost 2 - 1/2 years...
I'm back now and I decided to go back to the basics first - which you teach VERY well...
As a retired Mechanical Designer I can see say that you make everything straight forward...
I'll do things the right way now - the METHODICAL way this time...
I design the interiors for Class B RV's...
Thanks again Kevin...
Pete

PS- I am trying to get a STP file or BREF of the Mercedes 2500 - 144 wheel base - High roof to make it easier for me to design...
Do you know of any way of obtaining these drawings?
I don't mind paying for them as it would make my design work a lot easier...

peterscarpa

I'm a hobbyist currently learning Fusion 360 and enjoy the content you produce. I don't know if you have received any similar feedback but in my opinion it would be helpful if you could slow down a little. I find myself constantly having to go backwards to listen again. Regards Alan

alanrichardson

Your videos are great! Crystal clear explanations. Besides, learning while modelling is very dynamic and makes it all the more interesting.

pedrogaleano

Your always give Cristal clear explanation
Thanks brother

sridharerror

I am excited to learn from this version of the course. I am anxious to relearn what I learned the first time. It has been a while without F360 for me as I got interested in other software, time to try F360 in addition to other tool tools now. Thank YE for providing interesting information.

sylvainforget

You should update your thumbnail to show 2023 with your new videos. I had a hard time locating them because I thought this was an older Playlist. Keep up the good work man!

CraftBuilt

Saludos Kevin. He aprendido muchas cosas con tus tutoriales.
Si puedes ayudarnos a diseñar piezas con encastres para corte laser usando parametrizacion.
Muchas gracias por enseñarnos. Exitos

pigmetto

I have copied the 20 videos onto my laptop to take with me on my vacation so I can get started learning Fusion 360. Are there any files I need to download to use those videos? Problem is I won't have the internet while I am gone so if there are files I need other than the videos, I need to download them to my laptop before I leave on Monday. Thanks so much for creating these beginning steps.

jaybeckham