James Hardie Siding Joint Flashing | Best Practices

preview_player
Показать описание
Joint flashing: James Hardie recommends that a slip sheet (joint flashing) is installed behind each butt joint in the siding.

This is a 6” wide piece of weather-resistive material to make sure that no water gets through.

Proper Hardieplank Siding Joint Flashing

1. Good: Roofing Felt Paper
2. Better: House wrap
3. Best: Joint Flash

Always demand the BEST, it’s worth the extra cost!

  1. Carolina Exteriors
Рекомендации по теме
James Hardie Siding 0:00:57

James Hardie Siding Joint Flashing | Best Practices

Joint Flashing Sheets 0:00:46

Joint Flashing Sheets - James Hardie Install

How to Install 0:01:14

How to Install Joint Flashing

Retrofit a butt 0:01:52

Retrofit a butt joint flashing for Fiber Cement lap Siding.

How To Install 0:01:21

How To Install Joint Flashing

Missing Flashing on 0:01:25

Missing Flashing on Cementitious Siding

Install Butt Joints 0:02:12

Install Butt Joints On Hardie Plank Siding -Install Two Pieces Of Cement Siding Against Each Other

How to: Caulk 0:00:31

How to: Caulk Hardi Plank Siding Joints

James Hardie Installation 0:08:03

James Hardie Installation Guide brought to you by Northville Lumber

Hardie Plank Joint 0:00:54

Hardie Plank Joint Flashing Made Easy

Proline Plank butt 0:02:37

Proline Plank butt joint flashing when installing fiber cement siding & Hardie ColorPlus Technol...

3 Common Installation 0:03:20

3 Common Installation Issues with James Hardie Siding

Treatment of Field 0:02:23

Treatment of Field Joints/Butt Joints on Hardieplank Lap Siding (primed version)

James Hardie Fine 0:01:21

James Hardie Fine Texture Cladding on our extension @oakbankreno3880

How To Install 0:01:27

How To Install Horizontal Flashing

Flawless Siding Secrets 0:20:34

Flawless Siding Secrets - Matt Geeks out on the James Hardie Details at His House

Flashing at button 0:00:10

Flashing at button joint in fiber cement siding

How to Caulk 0:02:54

How to Caulk Hardie Plank Lap Siding Field/Butt Joints-DIY/Post-Construction

Don't install Hardie 0:00:55

Don't install Hardie Board without this! #building

James Hardie Butt 0:01:32

James Hardie Butt Joint Caulking Instructional - Explained in a Quick Minute by Preview Construction

What’s New In 0:07:25

What’s New In Siding 2022? Hardie’s New Stucco & Modern Exteriors

James Hardie Deep 0:00:36

James Hardie Deep Ocean Siding Color Design Ideas & Project Examples

Hardie panel with 0:00:29

Hardie panel with flashing full install

How to install 0:28:52

How to install Hardie® VL Plank

Комментарии
Автор

Great videos. Would like to see one on proper flashing methods above windows when installing Hardie board/batten and lap siding.

GaynorGreen
Автор

30lb felt works just fine. Several houses I did over 40 years ago. Zero issues

jimclark
Автор

Roof paper is actually great, cheap and not made of plastic.

zboogies
Автор

where can can one buy that 6 x 8 plastic joint flashing.. ?

pctatc
Автор

I use EPDM scraps I got from a fellow putting full membrane roof over mobile homes. Rated for 30 years direct exposure to UV. Also slit house wrap and tuck EPDM under in critical areas such as downspout dumping nearby or high wind driven rain.

madcowusa