Chevy Cruze Custom PCV Fix Kit & Custom Catch Can Setup!

Description Update Soon!

[chrissnyder]

How does this only have 3 I need to watch the whole video but I am intrigued in first 2 minutes!! Hope I can buy this or build my own. I'm tired of valve cover replacement!!!

[CONFUCIUS-fx]

That one way check valve will open at what PSI????

[thebigbravo]

Hello great video. Where can I purchase the catch can you are using?

[bamag]

Man I wish you were in Massachusetts....my mechanic tries his best...and the chevy dealership is too much

[philaneous]

Will it effect a visual inspection for a smog test?

[ГеоргиВасилев-нх]

I saw that you already port intake manifold, did you find any differences about response in lower rpm ?

[nathan_lbz]

'14 Cruze LTZ RS, catless down pipe, billeted waste gate actuator, and BNR EFI Live tune. I installed the V1 PCV fix kit, with an Acdelco FC256 oil cap, then ran the intake manifold PCV outlet to a mishimoto catch can, then a check valve, then connected to the PCV turbo inlet with the stock check valve. Finished that about 2 weeks ago. I didn't do the oil cap until about 5 days ago and up until that point I was getting a gas/oil mixture in the catch can. I haven't checked it since, but would like to reduce the fuel in the catch can so I'm just getting oil. I think I may have had a boost leak through my old oil cap so hopefully replacing it will fix the fuel in the catch can.

[IpunkP]

Can I just block that manifold pressure valve and route all pressure to pcv in front of turbo intake? so it just one valve work in all crankcase pressure from idle and boost phase condition.

[antmel]

I love your video I'm preparing for the day ultimately when I would have to do this modification to my intake. By any chance do you remember what code would pop up with that aftermarket MAP sensor

[sancheztorres]

What type of hose u use for the catch can what kind material

[HighVibeTrybe]

Ok im new to all this . I just bought a 2019 Trax . When I pull the pil diostick there is a heavy suction of air . Is something wrong it making that vacuum/ suction noise ? It does Not show any codes (Ii used 2 dif code scanners )
Does this kit fix that ?

[edirmarierivera]

Um..do you have a list of these things j can refer to. I have to do this for mine as I’m facing issues with this as well. Would be greatly appreciated ❤️

[ryanfalter]

Hey Spool, is there a way to just get rid of the PCV system if using a oil catch can? After looking at the way the vacuum lines are run I have a few questions I was hoping you could answer. Is there a reason you have to have the crank case gases recirculating back into the intake? I was hoping to completely block off the PCV check valve on the intake manifold and just route it straight to the turbo via a catch can. The way it is currently set up it seems the two lines are working against each other when the intake manifold is under vacuum and the intake is pulling in fresh air. I know there is a good chance that I do not understand how this system works. Could you shine some light on this for me? Thank you!

[cavidshirxanzada]

Hi. Want to know will it stop the oil in throtle body? I have oil in here. And i have a pressure from the hole dipstick.

[Angelorta]

What about the 2.4 20 and15 equinox we got the same problem

[oluwayemisiojo]

Good evening please I have some issues with my Opel zafira tourer 1.4 Turbo 2016 the engine do overheating oil is escaping from intake manifold to turbo. Please and please what is the solution
Thanks
also we are try put on pvc1 oil is still escaping to turbo

[nathanmedeiros]

Can you go over everything done to your Cruze??

[donalduckisaquak]

Great video. Can you talk about the flex fuel kit??

[TT-hyhg]

Where did you buy the throttle body spacer? Did you drill a hold in the throttle body spacer too.

[deewilliams]

Did u have to get a immobilized bypass for your radio to use the automatic start ? I have that same radio in mines an was wondering