filmov
tv
Building the X-Carve Waste Board Assembly | UK Version | CNC Build Series 1
Показать описание
The UK version of the waste board is different from the version sold directly by Inventables. In this video we put together the work-area section of the build and quickly modify the baseboard to make it easier to install the 144 threaded insets into the back of the board.
This video will be part of a short series focusing on the challenges and experiences of putting together this machine.
I'm building the Inventables X-Carve 1000 CNC which is the biggest machine they do. The build takes place in May 2019 and reflects the revision on-sale at that time. Your machine may differ slightly from that shown.
I know from experience that this can make putting in the threaded inserts difficult so I've added this step to the instructions supplied by Inventables.
AMZN: * As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible, for example some products are not available outside the UK in which case I have selected something similar.
This video will be part of a short series focusing on the challenges and experiences of putting together this machine.
I'm building the Inventables X-Carve 1000 CNC which is the biggest machine they do. The build takes place in May 2019 and reflects the revision on-sale at that time. Your machine may differ slightly from that shown.
I know from experience that this can make putting in the threaded inserts difficult so I've added this step to the instructions supplied by Inventables.
AMZN: * As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible, for example some products are not available outside the UK in which case I have selected something similar.
Комментарии