High-voltage transformer winding

My laboratory equipment

Microscope

FOLLOW ME

[withinyouwithutyu]

I love winding transformers and tesla coils. Something so satisfying about it.

[anthonyvolkman]

Really nice demo on making the transformer itself. I recommend finding some ferromagnetic glue to hold the core together. I noticed the core is a flyback core, you can also use the retainer pin for extra stability (which my require fine tuning to achieve proper resonance between L1 & L2).

[longde]

Now that I've watched for a third time... Great video. I honestly can't wait for the next video. I hope I can get my videos to this level!

[Berghiker]

Mine I made with 2 metal clips that hold the 2 pieces together. Works perfect! I can also take it apart and use a different secondary coil for other applications. I like it that way because mine is flexible. Don't have a video of it because I made it a long time ago.

[GeorgeGeorge-xjbc]

Thanks for video and the idea.I took also a similar magnetic core and i made a custom CCFL transformer for replacing the original one and impossible to find for a tv repair on a Philips 32PFL5604H/12.

[Berghiker]

Mine produces thick orange fiery sparks (probably more current than yours). Also much more dangerous. I used 2 IRFP250's. I also used a 0, 68uF cap across the 10 turn centre tapped coil. I get really long fiery arcs from just a 700 turn homemade secondary coil (with NO resin HV protection around the coil) using 25VDC from 2 lead acid batteries 7Ah each.

[nillchen]

really nice! I was afraid that the number of available fly back transformers might decrease because I didn't know that it's so easy to make a high voltage transformer!

[inductor.]

2:35 when you are talking about "gap value" are you referring to the space between the two halves of the iron core? Ive taken apart flybacks in the past that have small copper rings where the two halves join and the flyback doesn't work half as well if they're removed. just confused why you dont need the gap, what is single ended scheme vs push pull referring to? the driver?

[raisinbranman]

"that prevents, that prevents" lmao

[adityashukla]

wish i had watched it a couple of days back! my science project would be so good

[malik_chaabane]

Keep the good work bro 👌 You just got another subscriber 😋

[TiagoOliveira]

holding high voltage cables with normal pliers.... very smart

[Electronichub_]

I have some ferrite roots from old radios.
Can i built the core out of them?

[mrblack]

Is it possible to make a transformer useing Headphones wire....

[abhilashamore]

May I know from which transformer you took the wire pls tell of which appliances is this

[mohamedrasheed]

Please how can I test it's isolation can i test it using isolation tester

[lukewilson]

Can you make a video on how to wire it and what progs connect to what cause I have a transformer but don't know how to wire it up

[CREVchannel]

Can this be used in a flyback transformer?

[Shockszzbyyous]

when you put the resin in you should have put it into a vacuum too, that pulls the bubble's out from underneath the layers, that way it won't be able to arc between layers.

[rogeronslow]

Why do you use sellotape rather than transformer tape?