Loctite Power Grab

This description may contain affiliate links. The companies you purchase from pay me a tiny commission for introducing you to them.

[askthebuilder]

@jimlupi I believe they warn you about that on the label. It makes total sense it would not cure as it's water-based.

[richardhewitt]

wow! I got a good night's sleep and dreamed about his caulk gun operating skills all night!! he is obviously the best and most investigative builder on earth

[fieldaj]

This stuff really is super. I keep a tube or two in just for general supply. It would be nest to see him do a shear test on the glued panels, vs. just ah "ughhhh" pull test by hand.

[irhererOfLoL]

loctite seam to make the best adhesives, such as there superglue, which holds plastic to plastic even under stress (where i used it, on clips holding motorcycle plastics together and so far after heavy knocks the clips havent broken again) and there stuff that stops bolts from vibrating apart, which ive also used works great.

[OldHickory]

What do you think about using this as a clear caulk too (it would just be excessively adhesive)? But more so, if you have a very small, like one tile project, and, for instance, you don't want to break open a whole caulk tube for it.

[kenevans]

I believe in it I use it on my new shower wall and it worked grate. The walls did not slide down at all.

[georgenamathenyallen]

I think it was a very good demonstration and I learned something about the product. Thank you.

[peacesearcher]

I used the Loctite ultimate power grab for a marble break repair. The adhesive states it can be used on marble, granite etc.. First off its a jelly like adhesive and easy to use and dispense. Hoping for great results after 24 hours.

[debandmike]

i've never glued wood to drywall in the horizontal position considering most drywall is in the vertical position. Holding power for baseboards during drying time would be good to know

[askthebuilder]

@racer4560 That's always a good plan. Try out new products. You might be surprised to see they work better and are easier to use. I love the fact it dries clear.

[Nubyrc]

It sayd on the list of things it can bond, one is aluminum, have you tried it with aluminum?

[davel]

You forgot to show how to open this thing. It's a NIGHTMARE! We tried cutting it with a knife, a hacksaw, nothing worked. We finally got into it by drilling a hole with a small bit, then went to a larger one. WOW!

[askthebuilder]

@donyario You have to do the math yourself. Then you have to factor in strength, features, type of clean up, ease of use, etc.

[askthebuilder]

@rawan2010100 Simple. Click the link in the description of this video if you want numbers. You can't put a price in the video. What happens years from now? You can't go in and keep adjusting the number.

[clemonscg]

Do you recommend this for putting tile on the wall?

[lennonpolo]

Can l use this to stick my wheels on instead of using Lug Nuts?

[Jimmy_Cavallo]

💥You could have used Dap caulk exactly the same way and 24 hours later it would have bonded just the same. I am still trying to figure out what the advantage of this is over basic Caulk which is half the price. Has anyone anyone tried to remove a piece of base trim that has been caulked onto a wall.??

[sebestans]

I used premium on red bricks and held together strong enough to be used as tennis racket

[davidroberson]

"This is the first time I've ever used a caulk gun." lol

[julianachinn]

What do you recommend for gluing SPC floor tiles on wooden
stairs?