Nokta Makro The Legend Metal Detector New Software Update (Tutorial)

Software Update (2022.03.16): System Software V1.05
Download: System Software V1.05 (Windows):
Download: System Software V1.05 (MacOS):

Updates Made:
1. Pinpoint function has been improved.
2. M 1 Multi Frequency parameters have been updated.
3. Audio alert for Automatic Frequency Shift (Noise Cancellation) completion has been extended.
4. Factory default Tone Break value has been changed from 11 to 10 in Park mode.
5. Ferrous Off Discrimination Pattern has been updated to reject IDs between 1-10 in Park & Field modes.
6. Threshold audio level has been increased in Gold mode.
7. Audio response during ground balancing in Gold mode has been updated.
8. Backlight levels have been re-configured.
9. Bugs have been fixed.

VERY IMPORTANT!
PLEASE FOLLOW THE INSTRUCTIONS BELOW FOR THE UPDATE:
1. INSTALL THE EXE FILE.
2. CLOSE THE EXE FILE.
3. WITH THE LEGEND TURNED OFF, CONNECT IT TO YOUR COMPUTER.
4. YOU MUST HEAR THE ALERT SOUND ON THE COMPUTER INDICATING THAT THE DEVICE IS DETECTED BY THE COMPUTER. IF NOT, REMOVE AND CONNECT AGAIN.
5. WITH THE DETECTOR STILL OFF, PRESS AND HOLD THE UP BUTTON UNTIL YOU SEE THE LETTES ‘’UP’’ ON SCREEN, THEN LET THE BUTTON GO.
6. RUN THE EXE FILE.
7. SELECT THE bin FILE.
8. ONCE THE UPDATE BUTTON BECOMES ACTIVE, PRESS IT.
9. THE LETTERS "UP" WILL BE ERASED FROM SCREEN AND YOU WILL SEE NUMBERS COUNTING FROM 1-100.
10. ONCE THE UPDATE IS DONE THE LETTERS LD WILL COME UP ON SCREEN. IF YOUR COIL IS CONNECTED, THE DEVICE WILL TURN ON. IF NOT, IT WILL SAY CC AND SHUT DOWN.

To buy the Nokta Makro The Legend:

[erjtej]

thank goodness you posted this! The instructions on the website