FINGERPRINT ENROLLMENT

For FingerTec TA700W to read users for clocking system, users are required be enrolled in the device. There are choices among fingerprint or password enrollment.
　
It is recommended to enroll two fingerprints for each user to make sure the system can read the user even one of the finger is unreadable. With the help of software, you are able to transfer the enrolled fingerprint data from one terminal to another, without having to re-enroll the user again.
　
To make sure the fingerprint detection works properly, the quality of enrolled fingerprint must be good. This can be done by locating your center fingerprint at the center point of scanner location. While enrollment avoid using fingers that are too dry or wet.
　
Enrollment- To enroll a user with fingerprint, press the Menu button and you will enter the menu. Select Add User and press the OK button. Key in the ID and Select Enroll FP to enroll the first finger. Press OK to begin enrolling the fingerprint. Press the scanner lightly for 3 times. Once done, the first fingerprint will be enrolled. Press OK on the selected Enroll FP again for 2nd fingerprint and repeat the steps. There are two categories of enrollment which are Users and Administrators. This can be changed by selecting Role and Press Right Button. Choose M/OK and Press OK when everything is done. User is a normal user who uses fingerprint reader to clock in and clock out while an administrator acts as a supervisor or as the person-in-charge of the system. To gain access to the system, one should enroll under administrator.