GSXR cheap ebay no start key switch fix, easiest way with NO solder!

Here's how to make that cheap eBay ignition switch for your GSXR work.

[AshgTrades]

Im not sure why no one is commenting here.. all the other clips i saw are trash. Thank you sir for your time and the clear, short video

[Tfisayo]

This video is 2yrs old — watching in 2024 — and because you were kind enough to record and post this aid on YT, you help fix my dilemma with my GSXR yesterday! Thank you sir!!

[djdoctorstyle]

THANK I'm swapping the ignition for a new one since I don't know if previous owner has copies. THANKS!

[The_M-An-M]

Thank you thank you thank you! Saved us all headaches and hassle. Much appreciated!!!

[ManuelRodriguez-dhmp]

Best advice I got, it worked like a charm dude thank you so much

[RYKsopp]

Big thanks! This fix saved me some headaches 🤯 and time

[fernandomormul]

I will try that and I came banco here! Thanks in advance

[ashdivakaran]

My K8 1000 won’t prime the fuel pump and won’t crank. Do you think it’s a faulty harness?

[roadracejoe]

Excellent 👌 thankyou for posting this, worked a treat !! 👍

[mikehunter]

thanks man u just saved me alot from going to the shop

[ItsYourBoyRo]

Thanks for this video. I was on the fence about getting the chinese ignition sets from ebay for my sv650s. Think I will pick one up now

[thenew]

About to see if this comes in clutch 🙏🙏🙏

[Motard]

Thanks! Saved me from having to do a bunch of soldering

[demondbrown]

Just out of curiosity I have that same ignition I have a 2013 gsxr my pigtail has been cut do you know which wires go where?

[keepthinking]

I wish you had laid the original and the aftermarket next to each other because my aftermarket has 100 ohm resistor and I'm still not getting my fuel primed some wondering if they have it on the wrong wire

[jrtactac]

thank you 🙏 this video is very important

[pjdunti]

Wow thanks so much I'm having this same problem with me yamaha yzf

[djdoctorstyle]

I purchased an eBay ignition with same issue. Unfortunately the new ignition is sealed on the bottom so I'll have to go with the resistor on the black-white wire.

[juanojeda]

Thank you for the information, it helped me a lot 👍

[em]

What tools are needed to take the ignition off of the bike??? Torx?? T hex??