Flaring Copper Tubing! Eccentric, Spin, Orbital Process & Block Kit!

In this HVAC Training Video, I show Step By Step How to Ream and Flare Copper Tubing with each Type of Flaring Tool. I Flare the Copper Tubing with the Standard Flare and Block Kit, Eccentric Flaring Tool, Spin Flaring Tool, and Deluxe Process Flaring Tool. I use the Mechanical Torque Wrench to Tighten the Flares to the Proper ft/lb Torque. I use the Round Reamer instead of the Stick Reamer and Unibit to Prepare the ACR (Air Conditioning Refrigeration) Soft Copper. Supervision is needed by a licensed HVACR Tech while performing tasks as Experience and Apprenticeship garners Wisdom and Safety.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our Related Videos/Articles

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our HVACR Educational Books, E-Books, Workbooks, Cards, Posters, and PowerPoints:

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our HVACR Online Resources!

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Tools Used in Our Videos!

Support the Channel by purchasing tools through TruTech Tools!
Save 8% at checkout using code "acservicetech"
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Follow Us On Our Social Media & Podcasting Channels!

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
⚠️ Disclaimer:
Information in this video is intended for educational purposes only. Any work related to the topics in this video should be performed by licensed technicians or by apprentices under the supervision of licensed technicians. AC Service Tech LLC is not responsible for any possible damages or injuries caused by the use or misuse of any information provided. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#hvacr #hvacr #hvactrainingvideos #hvactraining #hvactraining101 #acservice #acservicetech #oil #flaring #coppertubing #coppertube #flare #blockkit
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Shop through Amazon! Your Purchases through Amazon provide a means for channels such as mine to earn advertising fees from all purchases after clicking through. Prices are the same as normal.

[acservicetechchannel]

For those that are looking for the tools used in the videos: (Linked Below)
Flaring Tools:
Swaging Tools:

Here are some of the other Tools I use:
Other tool links can be found in the video description section.

[jimbee]

AC Service Tech LLC is the very best site for proper procedures and techniques.
Very well and thoroughly explained.
I appreciate there interest and sharing the right and all details.
Keep it up guys great work and thank you!

[Jpriatna]

his explanation of the flaring tool was very detailed and very useful

[acrepairnearme]

Number 2 is probably the best for me. Thank you for the video.

[RineboBohead]

Thanks for going over this! I’ll keep some of those tools on my wish list. For now, I ordered a flare kit off Amazon for $16😆. I used to have one but someone stole it.

[Mentorcase]

One time I was putting a double flare on a trailer override brake when the person that broke it came up and distracted me, then after flaring I noticed the nut still sitting on the trailer hitch, after cutting the flare of and reflaring it I just realized that I had done it again, time for a coffee before having another go.

[SuryaTeknikAzli]

Thanks for the lesson..
I already have the tool, and I've used it but I don't use all the procedures, such as cleaning the end of the pipe after cutting.

[propanetechllc]

Spin flare looks useful for tight places

[NatePetersonrt]

I'm getting your book this Friday, thanks for the video Craig

[adil]

Hai a m from India
Your video is good

[luiselizalde]

Thank you teacher, excellent as always.

[Mostoich]

Very informative, thank you!! One thing I would add at least for beginners is make sure the flare nut is on before flaring.. LOL May sound stupid obvious but it's a common beginner mistake.

[garyheydenrych]

I was explaining how to flare to my helper and strest don't leave flare nut. Then I go leave the flare nut off the perfect flare.

[pburet]

thanks for an(other) excellent video - is it appropriate to use a flare+mechanical connection to fix a refrigerator ? I need to replace the compressor on my fridge and would be interested in trying this approach as opposed to brazing; or do we risk getting a leak after a few months due to vibrations ?
Thanks !

[stuzman]

Great demonstration of using the different types of flaring tools. I’m a fan of the orbital tool and not so much for the spin-type flairs. Great job as always! 😀👍

[grzejnikMilosz]

Last one pretty interesting and cheap for hobbyist

[douglasshackett]

Thanks for the video! That's the first time I've seen the spin flare tool used. Does anyone know if its as good as the conical flare block?

[nbctcp]

what are pros and cons using 1:40 minute manual flare vs 8:00 spin flare

[alejandromendozaperez]

Muy buenos eramienta de refrigeración me gusta

[kondavenkatagovindaraju]

Superb teacher! What is the cost of the book ? How to get it? Kind attention all responders must mention their country and date.