BMW Brake Light Reset Rear Brakes after Pad and Sensor Replacement Video

3 Series BMW Reset Brake Light. In this video i will show you how to reset the brake light after you change the pads and put a new brake sensor on. Basically as the brakes wear a sensor wears out and triggers the check engine light. The sensors are one time use and there are work arounds to bypassing it but honestly it's pretty cheap so best to get a new sensor. After you put it all back to together you perform the reset sequence as shown in the video and you should be good to go. Ignore the other light in the video, it is just my emergency brake light which is on at the time. This should work on most 3 and 5 series including the 328i, 335i, 528i, and 535i.

You can pick up the sensors on amazon on the cheap and other BMW Parts
Front Sensor
Rear Sensor
Other BMW Stuff I recommend

👨👩🦱👨 Follow Me 👨👩🦱👨

🎁🎁 Get The Gear 🎁🎁

📊📊 Trade Crypto 📊📊

📈📈 Trade Stockes 📈📈

💲💲💲 Get Some BitCoin 💲💲💲

🌈🌈🌈Tools I Use🌈🌈🌈

If You’re Not Talking Gains, Then Were Not Talking. :-)

❗️❗️❗️ DISCLAIMER ❗️❗️❗️
The content in this video references an opinion and is for information and entertainment purposes only. It is not intended to be investment advice. Seek a duly licensed professional for investment advice.

Edited With : Camtasia

#bmw #e92 #brakelight
#passiveincome
#HowHeDoIt #CryptoSlo #CryptoCurrency #BitCoin

[CRYPTOSLO_OFFICIAL]

Get The Sensors!
Front Sensor
Rear Sensor
Other BMW Stuff I recommend

[schmeerical]

THANX! Your's was the only video that included thee very important first step, push the BC until you get the time and mileage. Other videos I watched left that out and frustrated the hell out of me.

[johnfreisen]

I would like to thank you for explaining that very important step, push the BC until you get the time and mileage. I tried so many times watching other videos, AND NOTHING. Finally I saw your video and got the pad wear cleared in my 2013 M3. The dealer wanted $90.00 to do it. I did have an extra step when I started the car the next time, to click OK in the vehicle status, but all the trouble because I put new StopTech BBK on the car. Thank you so MUCH for your video!! Now you ask how did I get the light to reset with no indicator? EASY, use a dolphin splice for telephone wire. You dont even have to strip the wire and twist, just slide over the two wires and compress with pliers, it makes great contact and completes the circuit. Thanks again

[chisel]

If you try to reset the light and you get _ _ _ _ _ after reseting and the light does not extinguish, you need to change the sensors.  I had this problem.  I changed both front and rear pads and the sensors (got them off of ebay for $25 total, non OEM).  Once I changed everything I followed the video and wholla... worked perfect.  No more lines, light was extinguished and gauge was reset to 32, 000.  Thanks Mark you the man... !

[cpetro]

Thanks so much. Concise and the proper procedure. Thought I had done something wrong while installing the sensor on my 328i, but the other video I watched showed an incorrect method. Saved me a trip to the dealer.

[axlef]

Thanks. Worked for me. Much appreciated. One thing that was different for me though is the part at the yellow triangle. I had hold the odometer reset down and in about a two second window hit the BC button to get to reset. If I held it too long the triangle went away, if I let go of the odometer reset it started me over. So for those of you who can't get it to reset, hold odometer reset down and as soon as triangle appears hit the BC button(with odometer reset still depressed). It should then enter reset menu.

[shadowxp]

Omg. Dude you are a genius. It worked for my 2007 335i coupe. After driving my car with the red brake light and the car on the lift. Very annoying, specially after knowing that my car didn't need the brake pads or the sensors.The brake light came on after I painted my brake calipers. Your method works 100%. Thanks for taking the time to make this video.

[svenpazman]

I made this work on a 2010 (e60) 528xi. I had to mess with it a bit but not much! I had already replaced the brake pad sensors. Thank you!!!

[obavr]

Watched other videos on how to reset brake fluid light. Every other one was way wrong. Yours took me 45 seconds to reset it. Thanks!!

[ghz]

I changed my discs and pads + sensors all around. I have reset them before, however, I forgot the procedure. Watched this, followed as you a stated and it worked. Thanks a lot! (BMW E90 335i)

[shakhawanhassan]

After 9 year’s still great video and awesome tutorial thanks you saved my life.

[Pinochet]

Dude. Thank you so much for this video. My dad has spent hours trying to get his brake sensor light to reset following all the crazy YouTube videos out there. Cheers to you!

[akkiboy]

Saw so many videos but yours was the only one with accurate and adequate presentation ..finally reset brake fluid light on my 335i..Thank you!!

[GarthLovesTRAVEL]

dude you are the i went to mavis to get the code cleared and the guy was talking about having to take the car to another shop that has a more advanced machine to clear it blah blah!. i have new pads ans sensors and was still getting the brake light and no knew it was a simple task and after watching this video it worked like a charm!!! thanks so much +HowHeDoIt

[onearmy]

This is the correct one for a 328i 2008, finally after looking at all types of different ways, this one actually worked! Thanks a million!

[lucky]

Very helpful. I had to press the BC button until the rear brake image appeared and then selected reset for it to work (not just pressing BC button once) thanks - worked like a charm!

[patricksimpson]

Mate your a hero. Had watched a few vids before seeing yours. They didn’t work . Yours did first time. Clear simple on the money instructions. Thanks very much

[MrNatz]

It worked for me THANK YOU.
actually, i did not replace the pads, just the rear ensor. When the light came on, i checked the pads and noticed there almost new....so did not replace them just the sensor which btw was $18 at worked like a charm...thanks you saved me a couple of benjamins...
Im guessing the previous owner did not reset on replacement.

[kaspereverything]

Man your the BEST!!! thank you so much!!! I've been trying to fix this light for 3 months now!!! I change front and rear brake pads and sensors, and the brake light didn't reset after trying to reset it the way I was told on other sites and vidoes. This is the only one video that worked for me. You are a genius!! Thanks so much

[MrFanstar]

Thanks for posting this Video Mark. My 2011 BMW 323i had the same issue even though I had new brake pad. I just got it reset after watching your Video.