How to make cell phone signal amplifier From USB at home || Antenna booster

Hello , I hope you will support us . In this video, we teach you how to make a antenna booster with the highest efficiency. This antenna is made by an amplifier. You can use this amplifier to strengthen your mobile antenna Follow us on Innovation plus one channel

________________________________________

________________________________________
Required electronic components:
Old led bulb
IC LM741
Capacitor 2200uF
Capacitor 1000uF
Capacitor 10uF
Resistor 4.7K

Diy cell phone signal amplifier
mobile signal booster homemade
How to make 4G Speed Booster Antenna
How to make 5G Speed Booster Antenna
Mobile antenna amplifier
Cell phone signal booster
Mobile antenna booster
Antenna TV booster
How to make Antenna TV booster

#Antenna #booster #mobile

[devsoni]

The LM741 integrated circuit (IC) is not suitable for amplifying high-frequency signals like 2500 MHz. The LM741 is a general-purpose operational amplifier that is typically used for audio-frequency applications. For amplifying signals in the MHz range, you would typically need a specialized high-frequency amplifier designed for those frequencies. Amplifiers suitable for RF or microwave frequencies like 2500 MHz are specifically designed for high-frequency applications to ensure accurate signal amplification without distortion or loss of signal quality.

[n.vigneshv.c]

bro will it help in strengthen 4g mobile data flow in 4g smart phone ?bcoz currently in my location though 40 GB data in 4G smart phone data is not picking up. will this circuit solve this issue ?

[lipeeno]

Good morning,
Thank you for the effort you put into the video. Its clear and consise. And thats where my problem is i build the absolute replica of it including the brown sheath on the cable (thats a bit confusing actually) i've tried both YAGI and ground plane as an input and output aerial but to no avail. Literally zero. I am in the UK . Should i use different transistor(amplifier)? I think our range is both 800 and 2600mhz

[himanshupandey]

Amazing, i've been looking for a signalbooster for long

[MukinZaman]

Sir how much volt the adapter should be ???

[ferreollbandolo]

This is a great and simple Hack for the best antenna booster.
Thanks so much

[beche]

It's great, who should I do all this? Will the phone technician do it? thanks

[mustafaaktas]

First of all, thank you for your efforts. I think this system you are using is for terrestrial broadcasts. Do you have any work compatible with satellite devices?

[mrinmoybaruah]

I made it but when I switched on my ic is heating plz help me out of this problem...

[TheGhostGuitars]

Thank ye, I live in an area with poor cell reception. Ironically that's despite of being surrounded by 4 transciever stations all within half mile to a mile of my location. Unfortunately they all are blocked from direct LOS (Line Of Sight) view of my home by the topography of the valley walls and surrounding series of mid-valley ridges. My cell carrier wanted me to buy an expensive cell booster on a subscription basis.

After seeing this video, F that!

One final question, am I correct in ASSuming that this will work not only with 3/4G LTE but also 5G too?

EDIT: OK, I just read the description, it APPEARS that this booster will work with 5G. …I think.

[spshivram]

will this signal amplifier work with GPS tracker ? which will have IoT/M2M SIM card ?

[GIGI-dpux]

I have two questions: 1) Does it really work? (It doesn't matter which phone network Im user of, for example beeline/Cellfie right?). 2) Is it legal? (If I did something wrong, will they bother me because of unauthorized interference or fault in the telephone network?)

[tvstreamingservicesmaracay]

Greetings. This works with 4G band 4, frecuency (1700/2100) mhz ?

[itz_ashish_official_]

Will it encourage the internet speed ? Replyy me sir

[RIANRBRCHANNEL]

Hi friend thank you for sharing great vidio good luck friend

[AsadKhan-fntp]

Sir can you help me ...
I need little stronger booster then that ....any link etc plz plz

[anarghya.a]

Which terminal of the capacitors should be connected to which side?? Can you please tell for each capacitor?? 2:09

[pritambhowmick]

What is the voltage of this all capasitor?

[frequencywatchers]

i hate how everybody cuts the soldering aprta nd it looks like iots magic, NO, soldering is not something that you touch and it perfectly solders it to the metal without any problems especially with this nasty soldering iron tip.
you need to hold it there for a second so it can be secured by the solder itself and i would never solder copper to copper with solder and not knowing if the copper on copper contact exists, it 100% Needs To Ecist becauseif not, your sodler will act as a resistor wich will make antenna tranceivings wrong, it needs to be copper to copper and then you can introduce the solder itself, i useally smash the copper flat a lil bit so i know that tthe copper is superclose to the materiaal im soldering it. thisis a good tip for you all, le me tell you, i solder for 26 years now and i know what im talking about, .

[jhonearltabajonda]

Hello can i ask if is it okay to use 3 10uf capacitor if it is powered by phone? haha i dont know this kind of stuff hihi