ESP32 Upload Fix

🖥️ ESP32:
🖥️ ESP8266:

----------------------------------------------------------

Note: All information provided by ChilliChump is furnished only for educational/entertainment purposes only. You agree that use of this information is at your own risk and hold ChilliChump harmless from any and all losses, liabilities, injuries or damages resulting from any and all claims.

[freedomdriver]

I have the problem it shows me: Failed uploading: uploading error: exit status 2 The power Led lights up normally as well as the temperature is warm but not hot. What can I do?

[chronobot]

The capacitor across the reset switch is a better fix.

This is a work around

[tylervollick]

Hi! Thanks so much for these videos! I've been programming for a while now but have never done anything with Micro controllers or IoT. I'm really excited! Definitely had to scrounge around for a DATA Micro usb cable... standard charging cables weren't working. Thanks again!

[SarasD]

Thanks solved the issue in a second, everywhere else i could either find complex solutions or people saying board is damaged/fake etc. Thanks a lot

[DanishKhairuldin]

Oh my god, You saved me with this 2 mins vid! Thank you so much!

[kevinalward]

Thank you so much! Have wasted much time trying to upload first esp 32 and this fixed it!!!

[codetofight]

i tried holding boot button but it didnt work

[venchow]

I tried doing that too but it just seemed my buttons aint working.. the kept loading haha.

Any other ways to solve?

[briancondell]

What do you do if your ESP32 board does not have a boot button to fix this problem? I have the FireBeetle ESP32.

[Muss_._]

hello mr. i have same problem like u, but i still dont know how to upload coding. I was do like you do, and last statement say it is "Leaving... Hard resetting via RTS pin... " .

When i get this statement, what should i do for can upload coding, please help me sir😢

[elihoungo]

HI
Thank you for your videos
I have an error when I start to build my sketch for esp32 but no issue for esp8266
I m using windows 10
This is the error : exec: "cmd": executable file not found in %path% compile error for esp32 dev module board
I need help
THANK YOU

[fish_n_chips]

Getting the same error despite holding the button while uploading

[outkast]

Problem is, even if you get code on it, it wont work because it cant connect AFTER the write....the code writes but cant function.

[codeklaudia]

Thank you very very much for this vídeo. As a matter of fact, I have the very same Output message as you do in the end, after solving you issue : "Resetting via RST pin". I've read in the documentation that this is not a bug, but rather a feature. In any case, if the program is really being loaded, I can not see the builtin Led blinking as it was supposed :(

[ECMAHAMMEDARIFDUDEKULA]

Sir please do video on fatal error No serial data is received in esp32c3 many are facing the problem

[SHIVAMG]

UsbEndpoint[mAddress=2, mAttributes=2, mMaxPacketSize=32, mInterval=0. Why problem 😢😢😢😢

[marinehm]

This did not work for me at all, To upload your sketch to the ESP32:
Connect pin 0 to gnd. Press upload sketch button within Arduino.IDE program on your computer Once the upload is complete, remove pin 0 to ground and press reset on the D32. Your sketch should now be running. Also take note: The upload speed and serial monitor was at 9600 baud. Worked for me!
I digress; some ESP32s have a boot button.

[marwanyasser]

bro exit status 2;
how can i fix it.
please save

[gkppromotions]

Gerrit Postema, NOT STARTING ? just place a condensator of 10uF between GND and EN !

[brnsnipe]

Have you experienced some unprintable characters being printed before the "Hello World" is printed? It is only printing the strange characters the first time "Hello World" is printed, all following prints look as expected. If I print with an empty string in the "Serial.println("");" I see only the strange characters. Thanks again.


FYI: I did also double check my baud rates were aligned at 9600.