PS5 uses liquid metal and not thermal paste #ps5 #orlando

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

Apply it with a hairy loose q tip so it leaves strands of cotton behind to fry on your system...

UnderstandingCode
Автор

You can tell nobody in the comments has opened up a PS5 in their life. You did a solid re-application job here. It's rediculous how oxidized the SoC die and heatsink can get sometimes on these consoles. Seems like you cleaned this one up good, a happy customer no doubt :)

zachconnolly
Автор

Had my PS5 vertical since release day and no problems with the liquid medal

georgelescio
Автор

The outside of the chip is insulated to make it even easier to

Sleazyk
Автор

Yeah it's clear, after 4 years of using my ps5 vertically since i bought it, I was surprised by a failure where my PS5 no longer turned on, open it then i found out that the liquid metal was all gone and leaked inside the ps5, clean it so i've tried to put the thermal paste and when i've started the game after only 10 seconds the ps5 asked me to shut it down, then i cleaned all that thermal paste and replace it with the liquid metal CONDUCTONAUT brand one, now it's running perfectly but got no choice to use it horizontally now to avoid liquid metal leaks and drips

barakus
Автор

I opened up my ps5 slim and cleaned it and put it back and it was working, a few days ago I removed the liquid from my ps5 slim and applied thermanal paste and tried to turn it on but won’t turn on no more, it does the beeping noise when i turn it on but it won’t turn on either flash.colour

ElsiJdd
Автор

Iv heard theres just 4 degrees differance LM vs Arctic MX4. But thats for a PS4 Pro ithink. And idont know how much it affects performance?

tredfxman
Автор

Question

Did you ever had a case that the Liquid Metal would leak bc it Standes vertically?

unsurprisinglocks
Автор

Damn dude I feel bad for ya with all these negative comments from people telling you how to do your job 💀. If I were you I’d just be laughing at these idiots who are complaining to themselves in the comments. You followed SONY’s instructions and did it correctly while using what was provided, if these people aren’t happy with it then they should take it up with SONY 😂.

Frantic_AJ
Автор

After re applying, does the liquid metal stay in place, laying the ps5 horizontally. Does the dry spot only occur because it's placed vertical?

craigachuff
Автор

I experienced metal liquid several times get dry spot on my ps5 I am tired of respresd it I have replaced it with thermal grizzly PhaseSheet PTM so far so good

donnynapatok
Автор

Do you have any idea what error code CE-108225-1 means my start crashing soon as i start playing? Thanks

DARKO
Автор

Regular q-tip would soak it all up. What did you use?

slowroc
Автор

jeez bro that way to much liquid metal, just a thin layer on both side

barnabasbudai
Автор

Less is more! I use like 1/4 of that amount. You use way too much! It's to avoid air pockets, not bridge a giant gap 😂

countmorbid
Автор

My 4090 laptop which I'm watching on is liquid metal cooled.

CheddaCheesebrrbrr
Автор

Ps5 doesn't need tin/galium.
Now an overclocked closed loop PC? Sure. Just be careful with shorts and remember galium dissolves aluminum heatsinks

TikkaQrow
Автор

Eu tenho uma dúvida, o metal líquido resseca igual pasta térmica?

leorp
Автор

I'll be getting a computer next week so I'm going to dropkick my PS5, shit is wack anyways there are no good classics besides fallout New Vegas but you can't even play the DLC even though it says you will be able to and the ps plus is straight trash I liked it when ps plus was the extra and you were able to play online for Free. So FAREWELL SONY because it only takes twenty years to become garbage apparently.

thomaswiningear
Автор

Why can I just use really thick, thick thick and I mean really thick, thick, thick, thick, thick thermal paste

thewolfking.
join shbcf.ru