How To Check Brake Squeal Noise - Brake Wear Indicator

preview_player
Показать описание
In this video I will show you what happens when your brake pad wears down to a point where the metal warning tab starts scraping the rotor surface. I will show you what to look for and where the warning tab is located.

Watch How To Replace Rear Brake Video:

========
TOOLS:
3 Ton Hydraulic Aluminum & Steel Floor Jack

Torin Steel Jack Stands: 3 Ton

1/2" Adjustable Torque Wrench (50-250 ft-lb)

TEKTON 3/8" Adjustable Torque Wrench (10-80 ft-lb)

20V Cordless 1/2" Impact Wrench

EPAuto 1/4” & 3/8” Ratchet Socket Set - 69 Pieces

1/2” Metric Impact Deep Socket Set

Combination Wrench Set – Metric

Ratcheting Wrench Set SAE & Metric

Disc Brake Pad Spreader Tool

Wire Brush

Lisle 30200 Hand Impact Tool Set - 7 Piece

Wheel chalk

Rubber Mallet

GREASE & CLEANER:
AGS Sil-Glyde Silicone Brake Lubricant (for slide pin)

Permatex Ceramic Extreme Brake Parts Lubricant (for brake pad & caliper)

CRC Freeze-Off Super Penetrant

CRC Brakleen Brake Parts Cleaner

Nitrile Gloves 8 mil (Large)

Heavy Duty Citrus Hand Cleaner

Shop Towel For Hands and Cleanup

Safety Glasses

WORK LIGHTS:
Portable Rechargeable LED Work Light

Bright LED Work Light (Wired)

Headlamp LED Flashlight Work Light

Retractable Reel LED Work Light

=======
Shop Dial2Fast Store For List Of Tools & Parts

Support Dial2Fast on Paypal

Shop Amazon

Try Amazon Prime 30-Day Free Trial:

========
As an Amazon Associate and Ebay Partner, I earn commissions from qualifying purchases with the links provided here.
Рекомендации по теме
Комментарии
Автор

This video includes a lot of good info that compliments a lot of brake pad change video, as it goes in depth about the wear indicator and shows the difference between the thickness of a new vs. worn out pad. Also touches on checking the pads for unusual wear patterns.

jimdandy
Автор

One of the best edited car videos on YouTube

propanbutan
Автор

Excellent information. Superior cinematography. Thank you.

MCraig-lyqq
Автор

I just run into your video. It is absolutely great video, simple instructions explained in simple language. I will share it with my buddies. Thank you!

Getitright
Автор

Hey man thanks for the video. I don't know much about cars but I'm living in my van so I'd better learn. My brakes have been feeling weak lately so I've been worried. I still wanna get the pads replaced cuz the mechanic said they were at 30% like 3000 miles ago.
Thanks again!!!

williehaller
Автор

Another good video D2F. Also watched your Brakemotive video from 2014 with the Power Stop brake pads.
I recently did a complete Power Stop kit with new rotors for all the way around a 2003 Jeep Liberty and am really happy with them. Power Stop really seems to be good stuff. Along with new Monroe struts, shocks and Moog springs, it handles and stops better than it did when new and was a fun project.

BobbyW
Автор

Great video, explained how it all works.

markbenninghoff
Автор

Should the warning metal be on upward position or on the bottom or lower part of the inside of rotor.

macthiss
Автор

Very helpful. Now I know what to talk to the mechanic about

nadiaelisian
Автор

I wondered what the noise was? Great informative Thank

ZXBoY
Автор

Great video thanks. so the wear sensor goes on the inside correct? I got a new set of pads and noticed it has the sensor, my old set did not.

DavesGenny
Автор

Kept it simple! Yet explained it great! Thanks!

johnserrano
Автор

don't the slotted rotors decrease brake pad life as well?

bradleywesterford
Автор

Mine sounds more like a metallic grinding noise. Is that the same thing?

tentenchu
Автор

QUick question...is it safe to say the squealer will damage the rotor by digging into it?

troyporter
Автор

So the wear indicators should always be on the inside / caliper side? Thanks.

mogtrader
Автор

thanks really helpful for anyone born after 1986, as I sent this to my son to learn what to look out for and hear rotor damage occurs....i believe its too late for that now....thanks

w.p.
Автор

hello and hi do you know the torque spec for honda hrv 2020 on the brake caliper pins and caliper bracktes bolts?

Hardenth
Автор

My 2 rear wheels squeal like this, except I replaced the rotors, brake pads, and wheel bearing yet still hear squealing while driving and coming to a stop. Any advice?

Karmalu
Автор

great video. I started having this scarping noise 2 weeks ago from the front left. figured it was the brake indicator, but this video confirms it. Now the question is, do I only replace the front 2, or the back as

faraza