HVAC Sizing & Design

preview_player
Показать описание
Jake Bruton discusses HVAC systems for high-performance homes as well as how the system at Aarow Building's #Prairiehouseaarow works.
.
  1. Jake Bruton
Рекомендации по теме
Ductwork sizing, calculation 0:17:39

Ductwork sizing, calculation and design for efficiency - HVAC Basics + full worked example

Master HVAC Duct 0:00:22

Master HVAC Duct Design in 21 Seconds | Game-Changing Tips Revealed!

How to Size 0:01:01

How to Size Return Ducts-Design Ductwork #hvac #diy

Easy Way to 0:05:29

Easy Way to Design Duct for HVAC System (Sizing & Layout)

Residential Ductwork : 0:06:34

Residential Ductwork : HVAC Duct Design Basics

Size Matters for 0:00:30

Size Matters for Flex Duct

HVAC Sizing & 0:05:24

HVAC Sizing & Design

HVAC Sizing Explained: 0:10:39

HVAC Sizing Explained: Return Duct Design and Ductulator

HVAC Duct Design: 0:40:19

HVAC Duct Design: Manual D, Fittings, Friction Rate, Pressure Loss, & Static Pressure w/ Alex Me...

Master HVAC Sizing 0:00:29

Master HVAC Sizing and Design

💪Duct Design Methods- 0:00:49

💪Duct Design Methods- Air Duct System Design #HVAC #airconditioning

How to Size 0:07:16

How to Size Ductwork? #Ductwork #ductsizing #hvac

HVAC Ducting Classification 0:10:13

HVAC Ducting Classification & Sizing: By KHS Engineering Topics

Airtight Home Ventilation: 0:10:26

Airtight Home Ventilation: Where to Place ERV Exhaust and Supply Grilles (HVAC Training)

HVAC - Ductwork 0:04:45

HVAC - Ductwork sizing, calculation and design for efficiency

The Importance of 1:28:02

The Importance of Good HVAC Design: Load Calcs and Duct Sizing

HVAC Sizing. Formulas, 0:07:32

HVAC Sizing. Formulas, Rule of Thumb, or Heat Load Calculations

WRONG! Misinformation on 0:04:54

WRONG! Misinformation on the internet about HVAC system sizing and what you should do instead.

Sizing Ductwork THE 1:04:47

Sizing Ductwork THE CORRECT WAY

4 inch Rectangular 0:00:11

4 inch Rectangular Duct Size Chart (60 -300 CFM) #engineering #ducts #design

How to Create 0:07:42

How to Create a House HVAC Plan | This Old House

Ducting 2TR Toshiba 0:00:13

Ducting 2TR Toshiba FCU #ac #carrier #copperpipe #toshiba #hvac #mustwatch #hvaclove #ducting

HVAC Sizing Tool 0:28:09

HVAC Sizing Tool Part IV Ducts Design

HVAC design part 0:53:10

HVAC design part 2,Refrigerant copper pipe sizing, air terminal sizing, Ahu, FCU equipment selection

Комментарии
Автор

Jake, thank you for another great video. As a Mech. PE, I wish more people in residential would use us for their design, even if a pretty basic house. There is a guy on youtube that claims to be an HVAC expert, but he is not an engineer. You are a professional, Steve B. is a professional and a few years of watching videos does not make one a professional. Thank you for what you do.

coasttal
Автор

How do you put a vented dryer in a house that’s sealed to passive house standards? Seems like it would put the house under unacceptably high negative pressure every time the homeowners run the dryer. Conversely, if you provided mechanical makeup air, the house would have been under obvious positive pressure when running the dryer if the dryer vent wasn’t hooked up.

Without any other information to go on, I’m hypothesizing there is no makeup air provision in the house and the dryer vent came loose because it couldn’t overcome the negative pressure created when the dryer was running. But that’s just a guess based on limited information. Please elaborate on whether there is a makeup air strategy for the vented dryer and, if so, what that strategy is.

I ask because I’m in the process of designing and building a house that will aim for near-passive house levels of air sealing and I’ve been assuming I will have to abandon my vented dryer in favor of a ductless heat pump dryer. Thank you.

MichaelJ