How to put a 90 Degree Bend and a Double Set into one length of Steel Conduit!

A set by step walkthrough of the process to produce a 90 degree bend and a double set in one length of steel conduit to given dimensions.

======================
🕐 TIME STAMPS 🕕
======================
00:00 90 degree bend and a double set in steel conduit
00:49 Depth of the set
01:08 Remove the depth of the saddle
01:31 Coupler on firm
01:53 First bend 100 mm from the end
02:15 Start of the first bend
02:45 Find 70 mm
03:10 Mark the conduit
03:35 Mark against the former
03:58 Parallel
04:48 Fine adjustments
05:40 Measurement from the socket to the back of the bend
06:10 Mark the conduit
06:40 Top tip
07:37 Position the back of bend make against the former
08:27 Bend to 90 degrees
09:01 More bend required
09:41 Is it too short?
10:10 Measure for the final cut
10:54 Measure for the final cut
11:38 Cutting and treading
12:36 Reaming
13:17 Will it fit
================================
🔦 More conduit videos from eFIXX
==AD=====================================
Series produced in association with
Metpro - Conduit and accessories
Bend-it-now - Conduit Bender
=========================================
========================================
⚡️ Take a deep dive into the latest electrical products, applications and technology
=========================================
🚧 More resources for electrical apprentices and learners
=========================================
#efixx #conduit #electrical

[Jackh]

Absolutely bang on if you’re preparing for the AM2. Sat mine last week and passed first time. Cheers gents.

[markandrews]

That was excellent thanks, there's not enough videos on YouTube on conduit bending for UK trainees this series you are doing is absolutely 100 percent perfect, I didn't know about deducting the 6mm for the saddle which explains a lot keep this stuff coming it's extremely helpful even to us know finally qualified guys 👍

[Lloydy]

Not sure how it would fair in the AM2S, but for anyone else. A tip for the last cut. If you can get the distance from the end of the coupler. To the back end of your 90 bend, cut it at that + 15mm

Thread it so the end of your conduit is level with the first line of the nut of your stock and dye set (see 12:43 in the video, he’s done it)
that threads the conduit to exactly 15mm (30mm on the 2nd line) Every time, or atleast it has done every time for me since I’ve been using that method after I was shown it on site 4 years ago

[abdulseaforth]

Loved it Jake. The old boy seems to be comin' on

[Randrew]

Wish this video came in sooner but I passed my AM2S last week yay! The double set has to go into a central heating centre and must be central above the DB, the set I had to make was much lower than the one in this video but I’m sure all training centres are different slightly.

Thanks for the video this will help a lot of students out there for sure !

[mikethemask]

Just found this channel but I must say its really good I'm a sparkie and even I'm seeing a few things that can help me so thanks guys great work

[brianwood]

Grand job Jake. Now i'd like to see you go down the pub and have yourself a pint. I think you've earned it 😁

[jonathanrose]

Good job.
Magnetising the square makes it a bit easier

[GalacticGazetteHQ]

Great video lads trying to get the apprentice through his am2 he knows everything obviousley and shit himself when i showed him your videos! youth of today!!

[paul_my_plumbs_uk]

More AM2 please 💪💪💪 start to finish and everything in between 👍👍 HNY 2022🍾🍾🍾🍾

[rgbrownelectrics]

Top video chaps. Got this exact job to do on my AM2E tomorrow. Very helpful

[piotrlobacz]

There are incliniometers available allowing to take guess work out of bending. Great channel and fantastic set of videos. Well done guys.

[TheManLab]

I've never had a bender in my LIFE that starts at the very edge of the former. It's always a little ways in and to make sure it's repeatable. You mark the ACTUAL start by cutting the edge of the former.
I had a brand new bender one time so I cut a mark where it actually starts to bend too help everyone else out 🙂

[berkotropia]

Well done mate! I'm gonna teach this soon to students! It was very helpful video! I will give you credit!

[noskills]

Hope to learn metal conduit this year, good video

[dalematthews]

I can do that all day long and love steel conduit, I use it lots in houses, I've even got 32mm bender and threaders, great for tails buried in a wall 😆

[kentmasic]

I passed metal conduit but failed plastic, on retake I had to retake both, felt okay about plastic but metal was so perfect and fit in like a dream! Flush either side but got the result back and I passed plastic and failed metal 😂 appealed it (knowing/them tell me getting a pass is almost impossible at that stage) but got the email to say that my appeal was successful! 🎉🎉🎉

[Zombie_Longwinger]

How many goes did you do ? I’d have hidden all that bent conduit in the corner of the video first 😜

[mathgeek]

Smashing video lads! Keep up the good work 👏

[MPAX]

Very nice video I would also file the jaw marks of the tube as well, nothing worse than sliding your hand over the tube and slicing hand.