Easy Overclocking tutorial. ( I7 10700k , Asus z490e motherboard)

This is one of the easiest way to overclock your pc.
If you are not able to overclock it or having some trouble doing it, dm me on instagram or comment on this video.
This is very basic level of over clock but it will get you max performance. Thanks for watching and subscribe for more!

Text me here for your quarries:- _shivam46__

[dallaspersonalshopping]

10700kf-I have the Prime H570 Plus, it still can be adjusted
XmpII- Do not use auto settings except for bclk
Core 51x
LLc 5
Power-Extreme
Cache min/max 48/51
Vcore 1.385 (actual) manual
Dram 1.90 (actual)
Vccio-1.21/Syst Agt 1.23
Speed Step off
Speed Shift-maybe 0/1, or off
Boot-Uefi (not other)
Windows-High performance, or ultimate mode (need registry script)
Gaming on
When your good at o/c then change command rate to 1 vs 2, woo wee! Located where timing is

[KiLty]

Hands down the best most simple video to overclock I've found. Helped me finally get stable, thank you :)

[bredenorsol]

Good video man I'm a first time overclocker and I safely got my 10600K to 4.8Ghz. Good upgrade from my old I3 8100 3.6Ghz

[princekrystian]

thank you so much for the video! I found it very helpful

[lavonwa]

Thanks so much ! This help so much ! Awesome very well explained and simplified thanks again.

[viro]

Thanks it worked for me i clocked my ryzen 3 3100 at 4 ghz maybe after a while i can increase it

[motojesse]

Your dram voltage is way too high at over 1.5V. If I was you I would try the XMP1 profile instead of XMP2. XMP2 uses your ram's specified settings which may be too high for your cpu/motherboard. Xmp1 is asus ai optimized xmp profile which should adjust the settings needed to run it smoothly.

[test-rjvl]

Thanks for the video. When I put my Ai Overclock Tuner to Manual I still have only Auto for All-core Ratio Limit. So I had to use Intel extreme Tuning utility instead.

[artizzie]

You put it in Manuel ??? What did he do to you?

[SkojarnV]

You Have to manually lower the voltage of the cpu otherweise it can be dangerous for you cpu... I would recomends around 1.300 voltage not over 1.3600v

[edwardcastro]

great video!!! thanks brother have a great weekend!!!!

[JacPac]

Good video - well explained with details - Thank You

[william]

My Ai Overclock Tuner doesnt have Manual so I just put it to XMP

[dallaspersonalshopping]

yes you can run 1.5v for short spikes, but i want mine at 5ghz all the time, so I have it as low as possible getting 95% of capability.

[brandengarcia]

Yea but your frequency and ratio are up how do you change those I continue to try to find those so that I can adjust my cpu ghz it literally can push past that and it doesn’t want too cause I can’t find the option to switch ratio

[UnDeAdKiLLa]

I followed this guide and now whenever I try to boot I get a windows error code “INACCESSIBLE BOOT DEVICE”

I know very little about computers, this is my first build. I have tried resetting bios from the bios, cmos reset via the button on the back, tried plugging in a different SSD via sata cable and installing windows on that, windows installer won’t even detect a storage device yet I can see them in the bios. Oh and yes I have tried unplugging every other device including keyboard and mouse when booting. PLZ HELP.

SSD: Samsung 980 pro SSD with heatsink 2TB PCIe 4.0 M.2 2280

Mother board: Strix z790-h gaming wifi

CPU: intel i7-14700k

Ram: G.SKILL Trident Z5 RGB Series 32GB (2 x 16GB) 288-Pin PC RAM DDR5 6400

GPU: GeForce rtx 2060

[kibayaiba]

I don’t find CPU core ratio. Can someone help me why I didn’t have this option? I have 128 RAM DDR5 32 x 4 sticks of corsair dominator with ryzen 9 CPU and my motherboard is TUF GAMING X670E-PLUS WIFI in my PC can’t stop failing because of system instability for overclocking 😢 please help me

[xxDIMAxx]

Thanks for the video man.
I'm new in o.c. and I'm scare ti do something bad in my pc. I try A.I. oc.

What is the best way to use Ai overlock with asus Mobo.

Oc Tuner or Asus suite 3 ??

[AteJDGames]

Bro i used ddr5 5200mhz everytime i set in 5200. With xmp enabld . It boot. But every hours or minute i use my pc frezee. And nothing happen. No blue screen no restart just hang. What happen bro. And now i use your setting. Let se what happen

[thunderhawk]

Why is my processor running full all the time