Electrode E7018 and E6013 stick welding | welding tricks

Welding for you
watch and learn
E7018 and E6013 stick welding

[demekamitchell]

You have under cut on both 7018 and 6013 also you didn’t show what voltage and amps you running

[dailydad]

Sir, Are you weaving with 6013? I was taught not to weave 6013 cause it will trap slag and will cause porosity in your welds, you just drag it, no weaving.

[gilesburrett]

I think the difference is slag 6013 left a bit of a mess 7018 was cleaner 🤔

[Daus-eukw]

Both rod diameter is 2.5mm on 85 amps, both has undercut. Not a welder but i have seen welders set the amperage about 75 amps for the rods.

[luciusirving]

That 6013 is not Hobart or Forney. Forney's 6013s illuminate more and Hobarts penetrate more while also strongly flashing the background.

[AutodidactEngineer]

6013 has waay too much slag and it's a mess to weld with, for diy projects which invole rusty steels, 7018 is much more suitable!

[rakeshgaming]

Vai mujhe koi batao yeh sala 6013 ka elect rode itna kyu bekar hai sala metal samjh Mai nahi ata hai

[luciusirving]

6013s are hybrid these days. Comparing Hobart, ESAB, Conarco or Forney is like comparing apples to oranges.

Different compositions, different results. They may not be straight rutile anymore.

[dozerdan]

Well, that was a whole lot of nothing. Blocked