2022 50'Samsung The frame unboxing and wall mounting

Samsung QE50LS03B. Mounted on plaster wall. I have mounted hundreds of Samsung the frame 21 and finally the 22 models has started arriving in Norway, there is a shortage of the 22 models so still mounting mostly 21 models, but this costumer wanted us to mount a 50" 22 model, the costumer also said yes to us filming the event. Here it is. More videos of 2022 TVs coming soon. If you have any questions let me know.

[Zephyr]

Just bought this and excited to mount it, thanks!

[joaosantos]

I'm looking to mount a 50'' Frame TV on a thin drywall that has a pocket door on the inside and could use some advice. I've read that toggle bolts are a good option for this. However, I've run into a bit of a challenge: The wall separation is 10.5cm thick with the pocket door in-between with 3.5cm of tickness, leaving me with around 3 to 3.5cm of margin before reaching the door. This affects the left side bracket. The right side bracket doesn't have the sliding door issue.

Would cutting the provided nail in half or 2/3 still provide sufficient hold on the left bracket? Or should I consider a different type of anchor for the left side? Any suggestions or experiences would be greatly appreciated!

[tsint]

Gipspluggarna du använder, vad heter sånna? Borde gå att hitta i Sverige oxå :)

[sethpettman]

What anchors are you using? They seem great!

[justtube]

6:42 we just gonna watch past that fart?

[rabinahussain]

Hi, would you say the tv is secure with this bracket? I’m worried my kids will poke it and it’ll fall off?!

[safenajar]

Is it possible to rotate the tv? Imagine we want to see it from the dining zone instead of the couch that is in front. Thank you

[allanwu]

This was very impressive! I’m trying to remount my frame tv and don’t have the template this time. How did you figure out how far apart to mount the brackets? Did you attach them to the tv and measure the distance in between? Thanks so much

[อยากจะรวยต้องลงทุน]

Very very very great video, no talk too much but understand

[maciejbarwinski]

Great video, thanks! I just hooked up the tv to the power and one connect but I’m not getting anything on my screen. Is there something I’m missing? The red standby light at the tv was never on. Is there one on the one connect?

[aceloth]

That one connect box is quite big!! I just need power and no HDMI since I stream everything😮

[jouldalk]

Is it 3 screws per wall part (6 screws total) like you did or 4 (8 screws total)?
If it's supposed to be 4, is there any advantage of using only 3 screws (appart from saving time and making 1/2 less holes in the wall)?

Tx

[andreshernandez]

Is the general connector on the back fully inserted into the screen or a part is left out?

[michaelbingham-hawk]

Thanks for the mute video, Helen Keller

[jesso]

Hi I am just wondering do I have to have the tv magnetised to the wall? Or can I pull it away so I can angle it down a little?

[pruthvirajmishra]

Is the 50hz display works fine ? Or it feels a little bit laggy ?

[joewalker]

I noticed there was text that stated you can adjust the tv when mounted. How?

[pokene_pokemon]

Seeing people hang things like this so easily makes me feel like an absolute idiot lol

[iliyasshaikilu]

how is viewing angle, is there any color loss?

[danielwaite]

Great video thanks! I can’t quite tell here but what is the rough gap between the wall and back of the TV when mounted?