HOW TO clean your Engine Bay the RIGHT way! #asmr #satisfying #cleaning #detailing

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

i would like people to notice that he didn't put the pressure washer close to anything at all. A lot of issues are found when you do that, as you are 1). putting pressure against wires, etc, where there shouldn't be 2). can force water into areas where it shouldn't be.

If you think about it, your car engine is designed to tolerate water since you will drive in rain. But rain isn't forcefully pushed against the engine components. So spraying from a distance is perfect.

arjunsecondary
Автор

Good job. Not too close with the hose and not too much pressure. It’s a rinse off, not a blast off. I always start engine and warm thru once done in order to evaporate of any water or condensation.

gaycha
Автор

I like crx updates ❤. keep it up!

I think u should do a video on cleaning all the gunk under the car

Kh_alzamil
Автор

This is fine, just remember to cover up any open airfilter "if you have one, like the sports filters", And dont pressure wash at 10cm distance.. let it atleast be 25-30cm or more!

Remember, you are RINSING, not actually PRESSURE washing the dirt off.

nuxxiz
Автор

key is to cover any exposed electrical and keep a constant movement of the pressure washer while keeping a solid distance on whatever you are spraying.

patc
Автор

How do u dry it? Or wait for natural dry?

deebusoh
Автор

I see cleaners in a bmw dealer use a small jug of solution and hand wipe it down, I used to pressure wash my engine bay in a petrol station, it never had issues to be honest.

StreetNavigator
Автор

You can easily Pressure wash the Engine bay, just keep enough distance from hoses wires etc.

Swiftershock
Автор

Does the water not damage the engine ???

GimJibbo
Автор

I had taken a water sprayer after cleaning with degreaser and didnt have any problems, most cars have water insulators on their electrical wires

alexluna
Автор

It’s okay like this. But always cover up the alternator, air intakes and battery. Those parts aren’t made to deal with water… I cleaned an engine bay ones and didn’t cover up the battery. Car wouldn’t start until everything was dry and failed on the battery. That was a french car though😅

DutchDetailer
Автор

Mercedes made their own version of the Toyota Yaris/Prius?

jordananderson
Автор

What spray did you use before the foam?

Skull
Автор

Good old fashion elbow grease works too

funkycoldmedina
Автор

I poured hot water over my friends dad engine bay without the small plastic beauty cover, I toasted two coils and all the spark plugs. I would assume some water with the cover is fine as long as it’s not super high pressure

myrror
Автор

I did this with my S class everything still works just be careful around fuseboxes

Mr_Fuji-M
Автор

If u have a diesel, there is no problem washing the engine bay

Nichita
Автор

What was in the sprayers? Degreaser and then foam soap?

newyork
Автор

Is tooth brushes bad? I used that to get to a lot of small areas so that I wouldn't have to take anything apart

juanvelazquez
Автор

What all did you use for the cleaning agents?

bamagym