Power Wheels Upgrade - HOW TO (20V Battery Upgrade)

Here's a simple and straight forward way to swap out your old battery for one of your own from your tools (Dewalt, Makita, etc.) and power up your power wheels. Enjoy!

Here are the links to some of the parts I used in this build. Please know that some of these may be affiliate links and as an Amazon Associate I earn from qualifying purchases. It won't cost you any more - it's just another way you can support this channel.

Music:

Thanks a ton for watching!

[protektosafe]

Doing random research.. find your video. good instructions...
your song listed "Even If the Sky Is Falling Down .." got you the subscriptions
All the best

[steverone]

What about a low cut off for the battery?

[alberthewitt]

I'm so deep in the Dewalt 20V game I'm converting my daughter's Jeep just out of convenience

[edgarcan]

Great project currently working on converting 6v to 12v wire harness with remote control stearing and backwards and forwards with speed control wish me luck 😅

[joseromero]

I did this upgrade today thanks to this video but i only got the adapter and nothing else but it keeps blowing the fuses after a while

[ericperkins]

How long is a fully charged 20 V DeWalt battery last?

[YouSeenitHereFirst]

Your rocker switch link is broken - can you share a new one? Appreciate this video, super helpful.

[bgladish]

My grandson power wheels has burnt a motor up..is it better to replace with 12 volt motor or 24 volt?

[MaxWaln]

Do you have a wiring diagram for this?

[joemont]

The switch was my resolution.
Got tired of pulling the battery.

[ServantoftheLord]

Great video! Just started getting into did this for my kids as well. They love it. Running 18v milwaukee because that's all i haves and got lots of batteries and rapid chargers.

I would suggest using a voltage regulator as well, wired right after your battery that way when the battery gets to a certain voltage (16.5v for mine) it disconnects itself so that it doesn't completly discharge your whole battery. If a lithium battery discharges completely, it will destroy it and it may not recharge anymore. Not sure what a safe cutoff voltage is for a dewalt 20v is but easy to find out. Just run your battery dead with one of your tools and then measure the voltage using a voltage meter to see. Then set your regulator to that exact voltage, just to be safe. Just a suggestion.

[bernyrodriguez]

I want to upgrade my daughter's quad

[bugeyes]

Why do you need a switch when it only activates when you push the accelerator?

[allthingscanbefixed]

I did this and works great but for some reason the remote control feature

[Solo_Rutas]

Hey buddy.. did the same to one. I can’t get it to work like that. If I turn on the power switch it just stays on.. it bypasses the pedal.

[stur]

How long does the battery last compared to a power wheels battery

[hamesworth]

So do you have to have the on off switch? If you take the battery out doesn’t that negate the power anyway?

[joshuapalacio]

I just did this and the radio on the power wheels comes on but the power wheels doesn't go anywhere like the tires don't try to spin why?

[Brent]

I just acquired a PowerWheels Jeep that my neighbor was throwing away. I plan on looking into to do the same thing with my Dewalt batteries. Have you had any issues with the batteries discharging completely? Some of the videos I've come across recommend installing a low voltage disconnect to protect the battery from fully discharging.

[charlesharsha]

How long will it run with a fully charged battery