Overvolted! Milwaukee Powered Power Wheels Conversion! Easy!

This upgrade is definitely worth while. Let's upgrade this power wheels ride on toy to convert it to use a Milwaukee lithium battery. Links for a bunch of other brands are below as well.

NOTE** - I'VE UPGRADED SOME OF THE COMPONENTS IN THIS SINCE I RELEASED THIS VIDEO PLEASE CHECK OUT THE NEW WIRING OVERVIEW VIDEO THAT HAS LINKS TO THE UPGRADED COMPONENTS

If you just want to use the tool battery and not overvolt anything this is what you need:

If you want to do what I did:
AND

Note * if your application has reverse you might want to use something like this for the motor controller and wire the switch up to the stock in car forward/reverse switch to retain that functionality.

Adapters for other brands:

[Tjohnson]

Of course couldn’t show the most important step which is actually wiring in the actual components into the controls module and everything else. Just showed a picture and can barely see where your wires go exactly. Helpful but not really helpful video

[spartan]

Is there any video that walks you through how to wire this kit not just show what you did after it was installed?

[matthewmichaelsen]

Slow-mo bench tests will now be industry standard.

[spartan]

You ever make another video with instructions?

[ericzayas]

The video is nice but it’s useless, unless you can show us how you wired it together.

[JakeFascendini]

Would I be able to just put the relay in so the car runs typically on the 12volt but the motors will run off the 18v

[jensondjenson]

Sure would love to see how you actually wire this together.

[Tjohnson]

PLEASE please please make an update video on wiring and showing each wire getting terminated or where each wire comes from and goes to. My sons car has been tore apart for over a month because I bought these products and tried to follow these steps without success. I’m begging you please

[gingerdude]

You deserve way more success, great video and I'll be sure to share it.

[robertdominguez]

WILL THIS WORK ON THE HUFFY FORD RAPTOR

[keque]

Can you please make a video of how you wired it up? I bought all the stuff you said and I have my sons car torn apart and I can’t figure it out

[Experiment.lab]

If i use your set up will i destroy my 12v circut board for my electronics like, reverse, forward and light system?

[WarMachine]

So, if your car does not have a remote control, but DOES have lights, the on/off switch and hi speed/low speed shifter like your jeep, do you still need to do the dual 12v/18v setup like youve done here? Or can you get away with just wiring in the "WUMZIJ " kit you linked here?

[plusdaddyyt]

So if u don’t want it to go faster just use first link ? That’s a 18v to 12v but will it still
Protect
My battery from
Low voltage ?

[bigworm]

Finally got it done, but I lost reversed. There’s no reverse now. Is that normal?

[Tjohnson]

How long you think before you do a more in depth video? Still have one tore apart not knowing exactly which wires go where to exactly.

[Tjohnson]

The red and black wires for the control board come out of where?

[TrevorKendall-co]

This doesn’t hurt the motors for the wheels right? Running on 18 volt?

[bigworm]

where did you wire in the low voltage cut off

[kittydaddy]

that kid was trying to turn it up. Why you holding back on him?