Front Bumper Switchback LED Install iJDMTOY (Nissan 350Z) | AnthonyJ350

Switchback L.E.D.'s are an awesome way to give your car some more style and safety. Use promo code FASTANDFUN18 and save 18% on orders for $150USD.

It is a pretty involved install (well if you do it my way). But if you do it properly, you'll have an install that looks factory and will last you a long time.

eBay user: motoringmax

#Nissan #350Z #SwitchBackLED #LED #LEDLighting

About AnthonyJ350

I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.

Please feel free to ask questions or give feedback either in the comments or e-mail me.

New videos every week.

Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.

Go Fast have Fun
Canada

Front Bumper Switchback LED Install iJDMTOY (Nissan 350Z) | AnthonyJ350

ANTHONYJ350

[patrickchamberlain]

I put this kit on my 2007 350Z convertible.A good tip to keep you from running wires to your battery.The windshield washer has ignition power on the passenger front.You can tap in to that and no need to have ground running to the battery also.You can mount the solid state box to the front bumper steel frame and have room to remount the front bumper.I used small screws and pre--drilled the holes.Add your ground to one of the passenger side mounting screws with a small heat shrink eyelet you provide.

[GuiBXL]

Great video man!! But i'm really having problem to find any wire that has ignition power, can you help me to find one? Thank ou so much.

[JesseJTheGreat]

If you ever sold your HR I'd buy it in a heartbeat, your work is quality man, great job

[CVObservatory]

Just installed mine today Anthony. Thanks for the video. New to the Z's. I've owned my 07 for two weeks and love it!!

[danux]

Great video and very useful. In the UK your setup wouldn't be legal so I made some minor changes. Basically DRLs can only be used in the day here, and they must be the only lighting on the front of the car. So I connected the white wire you ignored to the parking light and I relayed off my stereo. That way the DRLs are active whenever the car is running and they switch off when the parking lights come on.

[ZeeSD]

Which bulb are you using for the parking lights? it compliments this set very well. I ordered the kit so I would like to get those parking lights as well.

thanks

[carlosalenduran]

Wowww men the lights are fantastic and I have to tell you great job I love how clean you work ♡♡♡♡ your z looks amazing :)

[bradjim]

Great video, you obviously take great pride in your work! Have you ever installed an amp and sub in a vehicle without carpet. I run with no carpet(mud) in my 94 bronco and I have my amp installed on the trans tunnel cover. I removed it and installed bolts and locking nuts so it's very sturdy. I have my sub in the rear so I just loomed the speakers wire and used a loom clamp between one of the trans tunnel bolts. What are your method(or any tips) for hiding wiring in a jeep(or no carpet 4x4)? Thanks for any help, love watching your videos!

[AnthonyJ]

For people looking where to get these switchback lights.

[Quidproquo]

I like these LEDs!! I was hoping you could tell me which LED you used in the parking light? Looks very "Porsche DRL" like. Would you also do an install video for those?

[meehungverylow]

I watched your video and its great. I am installing a relay like you recommended. One thing I would like to know is where you got your trigger wire to bring in your relay coil. I am not sure where you got your red trigger wire. Thanks!

[juanrosalea]

Damn, I really wanna do this but I'm not so familiar with all these wiring stuff 😭😭😭 don't want to mess anything up

[rcghalohell]

Hey man, lol finally checked out the video. If this came in red I would get it to match my red daytimes(no clue how I haven't gotten pulled over yet, guess hid is bright enough) but did you put led turning signal bulbs in up top?

[Quidproquo]

Anthony, I noticed these LEDs have an option to dim the light when the headlights are on. I suppose because they are too bright for use in complete darkness. Did you set yours up to dim, and if so how did you connect them to know the headlights are on?

[samson_BNR]

hi, i was wondering if these look good to the eye as well. can you see like the individual LED's or does it look like a strip? i know on camera it looks good but i was just wondering what it looks like to the eye. thanks man, love your vids

[glennhuibers]

does this fir on a 2003 model :O? this looks awesome !

[highwaylover]

So I apologize if you have already answered this but it was a lot of comments to scroll.i purchased the switchback drl/ts kit and received it today.i was following your guide and the install video from ijdm to test function b4 I install. I have a dual module setup like you. when I touch the white wire(dim) to power nothing happens. I believe this is because the wire is going to the spot on the harness that has a grey wire not hooked to anything. Also I have an orange jumper coming off of my acc+ wire at each module and 3 wires coming out of the module that are not connected t o anything...all with pre-installed connectors. do you know which wire I should hook the grey lead to to make them dim and also what the other leads are for? I'm currently waiting for ijdm to respond to inquire but would like to get the lights installed asap...thanks much for any help you may have.

[firefall]

what amp fuse did you use for the relay?

[XplishpkrX]

Hey dude, I own a 350z Nismo and am wondering if this will work on the OEM Nismo bumper? I believe the reflectors used are the same despite being closer to the wheel wells. Thanks.

[PrplexedMG]

Is there a way to delete these lights entirely? For the sake of let’s say a different bumper? That way front blinkers still work?