How to Fix your Headphones by Replacing 3.5 mm Audio Connector

preview_player
Показать описание
How to Fix your Headphones by Replacing 3.5 mm Audio Connector. How to fix your Headphones by replacing 3.5 mm stereo Connector. How to repair Earphones/ Headphones and replace stereo 3.5 mm connector. Where to buy best 3.5mm stereo Connector.

Affiliate links:
High quality 3.5mm connectors:
Stereo connector:
Stereo connector with Mic:

Basic Soldering kit:
Amtech FLux:
High Purity Rosin Flux:
Soldering/Repair Mat:

Support my project:

Music: Topher Mohr and Alex Elena - Stalling (royalty free music)
Рекомендации по теме
Комментарии
Автор

i thought my speakers were broken at the beginning when you clipped the audio haha, clever. thank you for the tutorial I recently broke my studio headphones and could NOT afford to a new pair.

hoagie
Автор

You're the best. Can't hear can't see.

philfrydman
Автор

Came here to see how to connect stereo connector. Left with an idea for a ring as well. Awesome!

orMoreChars
Автор

Ensure that your cabling connectors, earth, red and green wiring to the new 3.5 mm plug are insulated to near the soldering join, if you do not then your audio performance will not function correctly as your wires will be touching inside the gold casing causing intermittent shorts. Remember too tin your wires and avoid cold welds.

garyandrews
Автор

the pins in these Sennheiser jacks are ridiculously small. It was the real pain in the ass, I had to solder this today and when I had screwed the enclousure, I realized that the connection was broken so I had to do this once again.

unfortunate
Автор

hi, my headphones come with green and a copper wire coiled around the red one, could that be ground? thanks

meyague
Автор

But where did you soldered microphones wire ?
To ground, left or right ??

digvijayyamagekar
Автор

I have a green, blue, red and copper cable, I assume copper is land, red is right but what about blue and green? There's mic but it is miday on the cable, not on the headset, so I guess one of them is the mic but why? Head phone only work on 1 side, always the same phone. I've welded the blue and the green on the same point and still there's only 1 phone that is working.

panchoskywalker
Автор

Hii sir .. 🙏can you suggest for me..to usefull pin .of presonus hd7 🎧 stereo headphone....buy. (Quality pin)please..

vaisakhsudhakar
Автор

so the two ground wires connected together to the ground?

MeAgain
Автор

I wanna see it if would work before soldering it. Is that possible? Thanks.

clarkevander
Автор

quite a bit more tricky than it looks, you need steady hands and good eyesight. I'm gonna need to get a proper magnifying glass and some decent flux as my first attempt was botched.

neodonkey
Автор

Hello, i hope you still reply to FAQ. This 3.5mm Sennheiser male plug, does it fit into smartphone, laptop or tablet female internal connectors? I know that the standard HiFi 3.5mm jack plug DO NOT fit correctly. Please let me know. Thank you

Zerjk
Автор

Bro I have Cosmic Byte G3300 headphone . The Jack Got Ripped Off And when I cuted the Braded Cable It has only Two wires One is green And the other Is copper and there's no Red wire. Please help

pubgsubgkhubg
Автор

Red cable center point me SOLD ki hai kya

sawankaranjkar
Автор

where do you buy the Sennheiser connectors?

stoolin
Автор

I want to ask sir. If 3 ring where is ground and mic? Left, right, ground, and mic. In video the ground channel is mic?

william
Автор

how did you soldered four wires at three i need to do the same.... PLEASE

tusharsinghal
Автор

this new connector are a hell for soldering sure its less expensive to make...

maxernst
Автор

So, that's it? I'm not doing it alone. Have great speakers connected to ps4 controller but jack or end of the cable is broken.
Really frustrating!

Frank-DuxVanDamme