You can mod your Xbox 360 with just two wires!

[DrKoneko]

I've always been surprised with how small the 360 modding scene is. It feels like the end-all be-all system for modding. A powerful system that can emulate most OG xbox games pretty well seems like the xbox og plus. Hopefully it'll become more popular in the coming years.

[ThomatoSauce]

I can only hope that the 360 Marketplace closing next year means that more people will work on creating a softmod for the 360. I don’t exactly fancy taking apart my 360e.

[TheCatOfWarCSGO]

I just wanna say, this could absolutely have been a main channel video. I'm glad I subscribed to the bytes channel to not have missed it!

[tOSdude]

Something to note is, because you were already RGHed you could pull the nand and reflash entirely through software before tearing it down, bypassing the extra soldering.

[bentbk]

It's interesting seeing the 360 running outside of the case. Not something you see very often.

[joshuamichael]

I remember my first RGH success, it was the morning of Christmas Eve 2013 and it was weirdly one of the most confidence boosting experiences of my life. Ten years later and I now do some really cool stuff with Pi’s that I wouldn’t be able to do if I never wrecked 3 xenon’s and 1 corona before getting a successful corona. Still works and gets played regularly for Skyrim.
I was hoping you were gonna show the new pi pico RGH but this one’s better. Gonna try it later.

[justanotherpxrson]

I have always wanted a modded 360 ever since I was a kid. I'm glad you talked about the difficulty at the end, because this video made it seem relatively easy at first 😂

[UcellFyn]

My RGH 1.2 had good boot times, but recently it started to take longer to boot. I've planned to resolder the chip and clean it to see if it makes boot times better again, so I'm glad I came across this video because I'm gonna get rid of the chip and do this. Great video!

[SirJohndill]

Being an RGH installer years ago, this is absolutely an amazing find! I'm surprised the scene are still finding new ways. Time to get out my RGH installs & convert them. 😁

[PoloHeysquierdo]

Watching this 15yrs later after going through JTAG mod on my 360. Cool to see that the scene is still trying to make it easier to mod the 360.

[SoundToxin]

I recommend ticking the optional box for usbdsecpatch when flashing back the modified NAND at the end (so not at the xell install step but the one after that). Lets you use unauthorized controllers. Everything from DIY arcade controllers to any third party controller (e.g. 8bitdo, gulikit) with an xinput mode and you can even use the Wii Guitar Hero guitars if you get an adapter for them, then use them to play Rock Band. You can also set your disc drive to play movies (not games) from any region instead of just the region you're from in one of the deeper settings areas, so I started doing that as well before flashing, though admittedly I've never taken advantage of that feature.

[cali]

Just last week I did RGH3 on my own Corona 360. Installed a 2tb HDD and added loads 360, XBLA, and OG Xbox games on it. I absolutely love it.

[jakeg]

Very cool! I used to make and sell RGH consoles over a decade ago. Very interesting to see folks still advancing and simplifying the process. I saw this hit my feed. I had to click it because I could not believe a two wire mod. Very interesting to see after all these years. If only it was 2011 again.

[JayRizzGod]

Man! I remember opening my Xbox 360 slim up, to mod gta 4 via hot swapping. I was 12 years old at the time and had no clue how to connect wires to a motherboard. Man time sure flies as I’m 22 now. Thanks for the video!

[writer]

rgh3 is fairly easy to perform, but take it slow, dont rush and just be aware of what you are doing, be careful with you iron placement, use flux and good leaded solder wire, use a nicely small tip at a higher temp (325 C), and just be careful.

[joblessalex]

So two wires plus a resistor plus a bunch more wires and a programmer. Got it.

[Harmonic]

If you want to save some time converting an RGHed console to RGH 3, just use the existing retail NAND dump to build the RGH 3 XeBuild image and then install it with Simple 360 NAND Flasher via USB. That way you just have to install the RGH 3 wiring, and you're done

[patryckpo]

This video gave the motivation I needed to mod my 360, this two-wire setup (plus the NAND solder points) is not easy, but is simpler than using a glitch chip, I used a Raspberry Pi Pico for NAND write and it worked flawlessly. Thanks a lot for the video! 👨🏻‍💻

[GW_Live]

I do these mods, the title makes it sound easy, only 2 wires! but is anything but easy lol. Great video

[apockets]

I super appreciate how concise you made the video. I know a lot of youtubers want to get extra ad rolls for extra revenue. You gave us all we need to know and the links to the really technical aspects. You should make a yt short for it too. you start pumping those out and you can grow this second channel alot. cover some of the stuff that macho nacho studio shows, but make it in shorts format and you should grow quick. thanks for the content. I already have an RGH3 360 but if I run across a cheap corona, Ill prolly attempt this mod myself, Im far from the best solderer, but Ive done the LCP rebuild on 1.6 regsboxes a few times, so getting a 360 under my belt would be cool.