Ford Fiesta Crank but No Start - Check your relays!

preview_player
Показать описание
Check your relays to make sure they are working properly! Also check and clean any corrosion in the fuse box, but do NOT use more than just a very light coating of die electric grease on your fuse and relay contacts.
Side note: There were no codes at all in the computer indicating any kind of problem. This car has the manual transmission. If you have the automatic, another big issue causing an intermittent no start would be a failing TCM module. You will generally get a “TCM / PCM communication” code if that is your problem.
Рекомендации по теме
Комментарии
Автор

you my good sir, have just earned a subscribler!
not sure how much of your content ima watch, maybe a bit more or you might become one of my regular watched channels, idk, but, you seem to know a lot about vehicles.

djaydeved
Автор

Hi brilliant videos i have fiesta mk7 same as in your video no crank what so ever put new battery few lights come on dash but still no cranks

Kaz-cm
Автор

Will be helpful for future projects, thank you.

EggburtStallone
Автор

Hi. I have a 2016 Fiesta Titanium Hatchback 1.6L sigma "J" engine. Approximately 11k miles after a complete tune up the passenger side mirror was torn off by accident. I got home with no issues. The next morning i had to jump start the vehicle and it ran like crap on my way to and from work. Rough idle, loud sound from front of engine, irratice shifting, and absolutely no power. I ran obd II and got P0365 and P0369. CMP sensor circuit B Bank 1. And same sensor intermittent. I know where bank 1 is but circuit B? So i replaced the both. No change. Sent to a shop they replaced coil pack ran better but still not right. So i did a real tine drive test and still got the first 2 codes and some pending misfires after further investigation i notice fresh oil under the complete left side front to back. Pull the air filter and a puddle if oil . I somehow lost a qt. Of oil. Also the ruthenium plugs i put in look like they had 200k miles on them and one was loose. So fixed the noise by tightening the plugs new AF new evap purge valve went for a drive and the car died with the code P0111 IAT sensor out of range. I got it started limped home and she cranks tries to fire but just wont start. Then found faulty plug wires replaced plugs with oem replaced the map/mapf sensor, checked all sensors the intake and exhaust VCT solenoids were out of range. Weirdest if all i cleaned the Throttle body . Checked the intake no residual oil. Pulled the PCV hose no oil there either. So where did all the oil come from in the air box? When i get the new solenoids and warranty plug wires and swap that relay . If she doesn't start, keep an eye out for a floating fiesta on the ohio river. Any ideas?

davidbelsito
Автор

Hi i have a ford fiesta 2012 diesel all of a sudden the engine turns but wont start.what can the problem be.

antonstoltz
Автор

Hi, I was driving my 2010 ford fiesta and parked for 20 minutes, came back in and it wouldn’t start, it’s cranking but no start, I did put some fuel in the throttle body and it started for maybe 10 seconds then it goes off

losangelesgamingsquad
Автор

Good day Sir, where is the crank shaft sensor located?

SeabeloSS
Автор

Good day! We were just watching your channel and you seem very informative. We are having this problem with my 2011 Ford fiesta we had to change the NVLD system which we dead. We finally got some crank to the car but now it is sticking in the crank position, but won’t roll over. I have to manually turn it off or it will continue to roll over. Do you have any idea why this would happen? It is definitely not the spark plugs and we’re pretty sure it’s not the fuel pump. Do you have any suggestions?
Thanks for your time !

kellyshute
Автор

I have a 2011 Ford Feista that when you turn the ignition it's trying to start but it just want start, and when you take your hand off of the key it keeps on trying to start, please help me, because no one seems to be able to help me.

debramartin
Автор

Does anybody happen to know what to torq spec is on a 2017 ford feista 1.6 cam caps

hughbunyea
visit shbcf.ru