HOW TO PROGRAM HONDA ECU IMMOBILIZER KEY AFTER ECU SWAP

preview_player
Показать описание
This video will show you how to program any Acura, Honda ECU key immobilizer after ECU swap it's common to have ECU damage after accident on any Acura or Honda. This video will show you a 2014 Honda Odyssey ECU being cloned.

THIS IS THE BEST AND VERY AFFORDABLE SCAN TOOL. I ONLY RECOMMEND THIS ONE. I USE IT IN ALL OF MY YOUTUBE VIDEOS. WILL PROGRAM KEYS AND ECU SWAPS ON ALL HONDA AND ACURAS.

Disclaimer:
Warnings And Caution

If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.

Рекомендации по теме
Комментарии
Автор

Another trick is getting a JDM ECU like I did. As far as I know, most cars in Japan don't have immobilizers, so those ECUs are usually plug and play if you get the right one. At least it was for me. I plugged it in and the car started right up. I hope that this information helps someone

averyalexander
Автор

Nice video, I didn't know that this could be done. But I laughed out loud when you said "you want to make sure that the part number matches up exactly". Not because that's bad advice, but because one ECU you showed was a 37820-RV0-A66, and the other is a 37820-RV0-A67.

averyalexander
Автор

Very nice soldiering trick on removing and replacing chip with old ecu. Like the point given. Thank you

nancysmith
Автор

So your current key will work and you’ll get a different mileage reading right by doing this?

tonytrilex
Автор

2007 civic hybrid chip# is s93a66 there are two pairs, 4 total on side of board opposite ecu connectors. No need to pull both covers, only the first one when you split the case.

danielcoig
Автор

Sir please can you make a video on how to test ecu parts using multimeter how to know if IC or any other PCM part is bad

Abdul_rehmn
Автор

Awesome video hope it'll work for me... but one thing you got the 2 chip locations mixed between the two boards. On ecu is upside down and the other isn't. So the locations on the new ecu would be opposite side of what u said in the vid

bobbyhandley
Автор

If this works! I'm going to lose my mind. In the sense of how educational this video. BRAVO! BRAVO!

fusionsportdaily
Автор

For a 2008 honda accord what are the eeproms for the immobilizer and vin immobilizer doing the pcm swap (used)

CarlosDelacruz-iq
Автор

We purchased a 2002 Accord EX 6 CYL. It has all sorts of problems you mentioned. Auto Zone's diags tool says it's an Accord DX. 4 CYL

Dflonn
Автор

I have a Honda Civic 2005 automatic... I'm not sure if the computer is fried or what but my mechanic thought it was. Should I pull the those computer chips you mentioned in the video off my old one cuand put to a new ecu part I got?

nisbock
Автор

If I replace the ECU along with the Ignition mobilizer do I have to have it reprogrammed

xtnguyenx
Автор

this is pretty clever, will keep this in mind ... thks 👍

bcbjbggjh
Автор

I have a part that is 37820-RGM-A61 the original part is 37820-RGM-A72. Would the be considered the same part?

tomwilson
Автор

How do you crack open the ECU? You mentioned a heat gun but I'm having trouble opening it. Would you mind showing how to do it or can you be more specific on the details.

yanitrodriguez
Автор

Can it be done reprogrammed with a scan tool or does the chip need to be swapped ?

gsrjaycee
Автор

Hey bro wud u kno wat in these ecu are related to the ac high pressure sensor. Scan tool says pressure is 500 psi with 5v but my gauges say the pressure is not high and multi meter says 3.75v on the signal wire

hawaiianslamma
Автор

Do you have the chip location for the Honda Jazz / Fit ? I have the same issue but ECU is different.

mohammadkhan
Автор

Hello, first of thank you for useful video. Second. (2003 accord ) thought you might know - I had a green key light flash at me and sinse car wouldn't start, locksmith came told me its the key immobilizer (the one on the lock cyl with the antena inside) part been ordered amd replaced yet no luck with reprogramming it, still flashing key and therefore doesnt allow for the car to start. Should I concider changing my computer on the vihicle ? Any info is great help . Thanks.

pashaATX
Автор

George, I have an immobilizer tech question for you. Honda, in 2008 and 09 modified their system by adding an external imoes unit which communicates with the control unit-receiver and the ecm. Now the Question! Does the imoes send a wake up signal to the receiver or does the receiver send its own signal without wake up? I have an intermittent signal at the s-net terminal of the control unit. Thanks for any tech support.

bobgedeon