Fastest Precision Mechanism Possible - Minecraft: Create

*UPDATE* Now with the schematic!

This is a Precision Mechanism machine made using the Create mod for Minecraft.
With the introduction of item vaults, the ability to cycle your multistep assemblies even faster is possible!


Leave a like if you enjoyed! Thanks :D

[TheLaziestOfNerds]

I usually build a belt loop and it's a pain to set up and I feel silly watching this video because this is a way better design

[Jowbaka]

You can place a comparator on the side of the vault and connect that redstone signal to the hopper, and this will limit the number of concurrent partially made precision mechanisms.

[floofydragom]

this was the best tutorial for create that Ive seen. I love that its so to the point and isnt filled with redundant information.

[Hlldn]

Hi Triobian, really nice Design, i love it, and did take small changes to mine ;)
Some tips:
- if your'se using a scematic cannon to build it, make sure the item vaults are placed correctly, 'cause the schematic cannon has problems with placing multi block structures.
- if you're runnning this farm at max speed, it can happen, that the vault is running full, and the incomplete mechanisms are running straight into the last barrel. To avoid that, i replaced the hopper with the gold sheets with a barrel and an andesite funnel. at the back of the barrel i placed a redstone link, paired to the other one, sitting at the threshold switch underneath the item vault. so whenever the item vault is hitting 90% capacity, it sends a signal and it is locking the gold sheet output untill the item vault is empty again ;)

[_bBryann_]

It still works, it's just putting the "item vaul" back in, since in this version it tends to bug and putting the filter back in.

[DaddyElfMan]

built this and it IS still working, HOWEVER, for those who are discouraged or having probs.. keep in mind that the 'incomplete precision mechanism DOES or WILL have to 'cycle' thru the conveyor 5 times. SOOOO, make sure you have enough of each item (small cogs, large cogs, iron nuggets to complete. If you load 64 gold sheets, it will start 64 incomplete precision mechanisms, you will need 5 times the cogs (each) and iron nuggets to get a complete 5 pass for all 64 gold sheets, ( if I remember the recipe for the precision machine correctly, 1 gold sheet, then 1 each small cog, large cog and iron nugget, then you have to process 4 more each of the cogs and iron nuggets, ONLY need 1 gold sheet per each completed device). Hope this helps. I found this recipe on the net and it verifies, if correct, only 1 gold sheet is needed. (this is for a manual/hand crank method), but works same as automated methods.
Steps:

Place the Depot on the ground.
Place the Deployer 1 block above the Depot, facing down.
Place the hand crank on the shaft of the Deployer. Test to verify you have it on the right side.
Place the Golden Sheet onto the Depot.
Place the Cogwheel into the hand of the Deployer. Turn the hand crank to press the cogwheel onto the sheet. You should see it change in shape.
Place the Large Cogwheel in the Deployer’s hand and repeat step 5.
Place the Iron Nugget in the Deployer’s hand and repeat step 5.
Repeat steps 5-7 four more times.

[MeWhenTheWhen.]

I attached a small mechanical press setup that feeds into the hopper, which worked quite well. (important : the press must be quite slow, since otherwise the item vault will just have an infinite number of stage 1 mechanisms inside.) I also added a mechanical arm to filter out all the trash, instead of just letting it go into the barrel

[jonathanblake]

Personally I'd extend the item vault out one more so I can swap the hopper input location. This would let it have priority over the hopper in placing items on the vault.
I'd rather have a few complete mechanisms than a lot of stage 1 incomplete ones.
As long as I remember the interaction right.

[masterkevkev]

Thank you for this video, and I hate you for proving to me how inefficient and dumb my design was -u-' ...
I just hated how slow the mechanical arm in my machine was in slowing down the production of the mechanisms, and I also despised the thought of expanding it any more or taking up any room. The darn ejectors have stupid arches, other inventory mods seem to not wanna take from a depot... but then in comes you. A design that literally shrinks the room mine took by 2 length wise and 1 height wise... 😮‍💨... create compacting really isn't my strong suit 😅

[henrikmogensen]

So here's what i did.
Run only 1 gold sheet through the process to get level 1, add that to a ALLOWED-filter.
Run it again to get to level 2, Add to filter.
Do this until you have all 4 levels into a filter and add that to the brass funnel.
The funnel will pick up 1-4 but pass on complete mechanism and scrap.

[Swaggbrother]

The thing is working, but my Hands aren't turning into Fists so now it's just pointing at the Golden Sheet

[dejazO]

lol was using weighted ejector and it was jamming my whole production line.

[klaiddnet]

simple and easy to make, thanks for design!

[maple-territory]

My brass funnel is only filtering mechanisms with no progress. Incomplete ones with various progress make it into the end barrel. Am I doing something wrong? The brass funnel is pointing TOWARD the item fault (crouch-clicked).

[Vc._.]

you're like the ianxofour but for the create mod

[josephwhitman]

Thanks dude! This helped me build my steam engine machine :)

[xenomus]

hi, playing on ATM, it breaks the gold plate on the first machine with the cogwheel appliance, any ideas why it doesnt work?

[doubt]

Me and my buddies call precision mechanism lines the hatred devices

[Dodge]

Just what I needed, but I've seen some incomplete mechanisms ending in the final barrel 7 times yet my installation isn't as fast as yours, but I'll do a loop underground (what is hidden from the eyes doesn't need to be pretty) to loop the incomplete ones back to the hopper where we insert the gold plates.

[Liam]

OK if like me you have trouble getting the deployers to work and you belt seems to jam... make sure the hoppers behind the contraption are connected to the deployers, and not to the item vault. I feel stupid but maybe my own stupidity will save time to some poor soul.