Torch Paste Tutorial

Torch Paste Tutorial - In this video, you will learn how to use Torch Paste to burn designs into wooden items and even some cardboard items to name just a few.
Get that professional laser-etched finish with very little effort using this wood burning paste, a stencil cut from your Silhouette Cameo vinyl cutter and a heat gun or heat press. The final result is truly spectacular.
Torch Paste is a great alternative to get an engraved effect on wood without using a laser engraver/cutter. Use it on wood, cardboard, card stock, and more. The bottle is 3oz (88ml) but a little goes a very, very long way.

This is where you can buy this product:

[Libsterga]

Amazing! Thank you so much for this video, Can hardly wait to try this!

[laurap]

I bought a board and it had a bit of a finish so I made sure to sand it some. No matter what my torch paste does not get darker. I’m using a heat gun with a very high temp las well.

[suebod-flzk]

Can you use a regular plastic stencil?

[nickiweekes]

How to you stop the wood from warping please

[mervezs]

Do you need to wash it after you burn it because i didnt want it black so it looks like there is also some paste on it

[ahmwas]

Which kind of application tape are you using? I went to the shop but counted figure out which one you used exactly. Seems to be better for that kind of project then the transfer tape normally used for vinyl.

[zandregermishuys]

Thanks for the video. Would you be able to do the wood cutting board with the heat press as well if you do not have a heat gun? Thanks

[valentinamalvestio]

can the ladle and cutting board be used in contact with food after using the torch paste or is it toxic? is the burnt effect lasting or does it tend to fade over time? Thanks

[seadawgonthewater]

How do you seal the cutting board so you can actually use it?

[eevagirl]

I use ikonart stencils. You can do 10 of those boards one after the other. And you can't just use any old heat gun like a craft gun as it's not hot enough. 1000watts + is recommended.

[lindaraluca]

Does it work with a hair dryer? I think this is a stupid question, but anyway😊

[sandeebond]

Thank you. I’ve been using Torch Paste for two weeks on wood! I didn’t know you could use it on “card stock”? Wow🤗. This is probably a stupid question but could you successfully use it and burn on “fabric “, without putting it on fire? Thank you

[sharonkarp]

If you left the stencil the adhesive on the stencil sticks to the box and you then can’t get the stencil off

[midnightsunicorn]

Does this work on the Bamboo style cutting boards that you can get?

[MegaChicla]

Where you bought the low tack stencil material for the cardstock

[jaymo]

Why not leave the stencil on while heating to minimize discoloring/burning to the surrounding area? Or would it melt the stencil? Thanks.

[rachelwlsparkles]

Will charcoal powder fall off and blacken the edges if rubbed?

[rachelcasares]

Am I assuming right that this isn’t food grade?

[ssavoss]

How much is the paste, I am need it ASAP for a restaurant project I'm finishing soon, might add some value to my client and extra cash for me.

[paigecherico]

Mine keeps bubbling everytime I use a heat gun on it :( idk what im doing wrong