Front engine mount replacement Honda Accord 2003-2007, Acura TSX 2004-2005 (STOP ENGINE VIBRATION)

Front engine mount replacement Honda Accord - This covers replacement of the computer controlled Honda Accord front engine mount aka Honda front motor mount on the 7th generation accord (2003 - 2007) or the Acura TSX (2004 - 2005). It is the same procedure on certain K24A engines in the 2003 - 2006 element and the 2003 - 2008 Odyssey. This repair is needed when a worn motor mount or worn engine mounts are detected. Worn engine mounts or poor quality aftermarket front engine mount for these vehicles cause vibrations in the car. I make a note on OEM vs Aftermarket mounts. Doing this necessary to stop engine vibration resulting from worn mounts. This is for the inline 4 engine and the removal of the lower radiator hose is not required.

Get the following items used in this video on Amazon:
Disclaimer: I may earn a small commission from purchases made through the links above.

[ArtemLokhovitskiy]

This video along with the one where you replaced rear mount is the best of all I've watched so far. And I believe the only one where that coolant hose wasn't removed, lol.

[dbbyleo]

Thanks for this video. I just did this maintenance last night as part of also replacing my starter. It definitely helps with the intake manifold out of the way. But even with the intake manifold removed, it was still very difficult to maneuver the mount out. So one tip I have is to just remove the radiator fan. It's very easy to remove them. You'll have to disconnect the top radiator hose to get it out of the way. I have no idea how you were able to take the mount out without removing the fan. Anyway... thanks again for the video.

[jonschlegel]

Nice brother. I used this video to do my mount. I did take out the front right fan to get more room.
Cheers!

[dannyr]

Job well done
I’m gonna use this video when it’s time to change my mount aka when I have the moola to do the one center mount and the thermostat/housing all one jobber
This is the best video out of many I found on YouTube pertaining to a motor mount swap for 2005 accord
Thanks my dude!

[schifoso]

Very good video. I appreciate the additional text you added in post processing.

[J_A_G]

Oh man I replaced my mount with a part from autozone instead of a oem part I’m hate it later 🤦‍♂️😢

[chevyhd]

Very good instruction and video, thanks

[anthonyheak]

Thanks for your video, great camera work and a lot details. Appreciate the post.

[JoseRivera-ujkm]

Thanks a lot for this video. I just replaced my mount today on my 2009 Accord and it was essentially the same process. Your video was extremely helpful and gave me the confidence to do the job myself. Thanks again!

One tip I will give for others is to clean underside of the mounting bolts with a wire brush and apply penetrating grease before removal, as the bottom of them will be very rusty, making them hard to remove otherwise.

[MiOEvO]

I'm stuck at the part where i have to jack the engine/transmission up.
I don't know exactly where to place the jack at. I don't want to bend / damage the oil pan

[eshbanvelez]

Clear and straightforward, thank you sir!

[daviderhahon]

Nice video.

Could you do a side-by-side comparism of the new and old mounts?
Thanks.

[brooklyn]

I had to watch this to make sure there's nothing extra u need to remove Becuase some street mechanics don't even know how to maneuver in a tight space I would do this myself but I don't have Jack stands plus my Jack isn't as strong as urs it's like one of those mini jacks that only holds up to 2 ton also how long did it take u to do just the front ? I'm trying to get both the front and the rear done same time the rear has some wear and tear but recently the front one some how got a crack now

[confidential]

The 2005 Acura TSX I have has have the clearance room from the engine to the radiator fans.... It's the same procedure but you have to pull the fans on the tsx for room I think?

[Wakeupandsniffthecoffee]

Hmm? I may try without taking off the radiator hose.

[Wakeupandsniffthecoffee]

Not sure where the vacuum hose was that you removed. Another YouTuber did it and never mentioned one.

[ssevngs]

too the point no bs assumes most watching are not
clueless idiots tells you tools required sizes and torque specs.
totally has is together on making short order of this job.

[thatz_jay_]

I have a p0171 code for the vaccum line for this motor mount after i got my other motor mount fix. Im not for sure

[pilotguy]

3 small bolts pull each fan out and saves about 10 minutes of goofing around.

[adekayerotemitope]

You sound like you are in Abuja. Can you do this repair for me?