ESP32 - Getting Started with Arduino Core

The power packed new ESP 32 is the Future IOT board.This video helps you with installing Arduino core & you can program ESP32 using Arduino IDE.

CP2102 Driver :

Source Location:

Target Directory:
C:/Program Files/Arduino/hardware/espressif/esp32
(your Arduino installation directory

Note : If you get Fatal error /time out while uploading code,
just press the BOOT key when you see Connecting --- .In some ESP32 models this is the default mode to upload code.

[Gaatech]

thanks for the video i have my esp32 working feeling happy. let the fun begin

[RTOHIO]

Thank you so much. I was unable to see ports on my Windows 10 computer so I could not connect with my ESP32 boards. You put me on the right track with understanding CP2102. I finally found the drivers on Windows driver update by sillabs and my ESP32 is up and running.

[sactalreja]

Thank you so much, I tried so many approaches but this works perfect. Made my day.

[HotFries]

Excellent video. I followed your instructions and got it right the first time! :-)

[manuindia]

Excellent! Dear sir, your video are to much helpful. Thank you so much for sharing this great information.

[quaternion-pi]

Tutorial worked perfectly. I, however, did install using python 3.6.1 without difficulty or errors. Thanks!

[axramar]

SARAVANAN Sir your tutorials are very helpful !Thank you....

[DRI]

Thank You for making this video, this helped me a lot :)
Best Regards,
Didier

[eriklaken]

Thank you so much, your tutorials are very good! Without you iT was not posibil for me to learn About IT my hobby .:) Every thing works, great!

[normheath]

Thanks for posting the video, it was very helpful and work great. Post some more.

[ericengel]

Worked perfectly on both my laptops, thank you very much for the tutorial I'm sure it saved me a lot of pain. I got error when uploading the Blink demo saying the the .ar file was in use and could not be overwritten. I did some research and found out my Anti-Virus real-time scanning was causing the problem.Turned it off for the first upload, then turned it back on. All following upload went OK. Keep up the good work!

[ruwansamanpriya]

Very interesting clear tutorial..keep up good work..appreciated.

[saidennaghimi]

Thank you Sir, my esp32 is well working with the two examples.

[aravindsrinivasan]

Thanks a lot, was stuck at flashing the code, didn't know that I had to press the boot button!

[bryanbaring]

thanks very much i have run my wemos lolin32 with the help of your video

[prakashkar]

Great and Great, Excellent. Thank you very much. 🙏🙏🙏 Hope the same procedure I should follow for ESP32CAM.!

[TheSflanker]

Thanks so much. I have managed to know about esp32 on Arduino IDE.  Very helpful video for me.

[garyrowlands]

Excellent concise informaative video with all the important steps.
To add just a little something that was maybe not relevant at the time of making this, but now with so many manufacturers and board schematics it is.
My board was exactly as you describe everything however the LED is attched to pin 1.

I mention this only because some people may believe whn the LED does not flash, that there is something more complex wrong. Just look around and change the #define LED_BUILTIN to a different number 1, 2, 3, 4, 5, and try the sketch again.

Thank you again for saving me time...

Gary

Congratulations Saravana, and than you.

[pietdepad]

Hi Saravanan thanks for the video I will use it.